Clio_Ben
ClioSport Club Member
182 Clio Cup
Afternoon all,
I have just finished building a kangoo 182 however it wont start/ crank.
The red immobiliser light is flashing the whole time even when ignition on (not fast like it doesn't detect key though). There are no fault codes when plugged into with clip either.
Have tried re-programming the original key and have tried a new key but the fault stays the same. Also tried all of the immobiliser reset procedures i can find on here. Have checked the white connector underneath the relays, checked all relays/ fuses.
Would anyone be able to shed some light on what may be the issue or what else to check.
Thanks
Ben
I have just finished building a kangoo 182 however it wont start/ crank.
The red immobiliser light is flashing the whole time even when ignition on (not fast like it doesn't detect key though). There are no fault codes when plugged into with clip either.
Have tried re-programming the original key and have tried a new key but the fault stays the same. Also tried all of the immobiliser reset procedures i can find on here. Have checked the white connector underneath the relays, checked all relays/ fuses.
Would anyone be able to shed some light on what may be the issue or what else to check.
Thanks
Ben