Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Yeah I agree on returns if I put new engine, and I bet it would be one of those where you end up spending more than you anticipated.
And no mot ticket in 2 months so theres another can of worms.
She is going to be harvested and boxed up for you lovely folk.
On that note, is ebay a sensible...
I would say poor condition, alloys are hanging and new front grille needed. A few tiny battle scars on body.
It has ktec 2.25 catback and ktec induction.
Sat on eibach sportlines
Otherwise standard mate.
Hi guys,
My 182 decided to end itself a few days ago, was reefing it along a country road then out of nowhere 'rattle rattle.... silence'
Engine out, head off and there is metallic particles in every oilway and engrained in every running surface, after seeing this im not even going to bother...
Guys,
I just read this http://www.cliosport.net/threads/steering-rack-is-it-broke.731422/
Someone there had an issue with the bottom UJ on column, but the steering seemed to act immediately, like me.
Now, how do I remove the big rubber gaito r without ruining it?
Cheers
Looking down at the driver side wheel, it moves immediately when turning steering wheel ever so slightly:weary: certainly one of those rare moments when you are disappointed that something isn't broken...
I'm guessing checking all the alignment is next I suppose, I presume if something was...
Hi guys,
I can't seem to shake this steering issue, it feels like it doesn't start to steer straight away if that makes sense, in a straight line I can move the wheel 15-20 degrees side to side without any steering or roll action which you'd expect, nothing. I'm lose to putting the car in the...
Gordian blue 182 2004, mot till June, both cup packs, 70k
Now, the guy wants 2650 for it however the last cambelt was in august 2010. He claims the last owner had it done in 2013.
any thoughts? My gut feeling is that the beld should be done again and priced accordingly.
Cheers
Whilst putting some air in my tires I noticed a 20p sized bulge on the side wall, just before the corner.
Obviously I'm annoyed because a) I'm no curb scraper and b) this means I now have to cycle everywhere for 2 weeks until I get payed :(
After looking on the net, it sees similar things have...
I need to know the bore size and taper for the cat's flange that connects to the manifold, and the pitch of the two clearance holes either side, does anyone know?
Cheers
Theres 2 16mm bolts per mounting bracket, remove all 4 and iirc you can leave the column bolt and the two captive M8's alone, make sure the rack is adequately supported :)