Superleggera'd lowish mk3

ksykes23 · Feb 23, 2013

Re: Silver MK3 TCE Progress Thread

Yep, gonna sort out the positive camber is my first priority, then will get some spacers. Could probs get 20mm at the back, get bugger all on at the front though. Thanks for your comments lads

ksykes23 · Feb 23, 2013

Also, yours is looking as good as ever tom! Are you running 20mm spacers on the front wheels as well mate?

TomGarvie · Feb 23, 2013

Sounds like a plan to me! Cheers dude

I am indeed, 20mm all round, eibach hub-centric's, can't ffault them!

ksykes23 · Feb 23, 2013

Hmmm i reckon i could
get 20mm in at the back easily but gonna have to have a lil measure at the front as i doubt i will get 20mm in there. The et of these wheels are lower than the canastas though. Maybe 10 mm or 15 at a push possibly? Btw good shout with the grill. Looks good. Wonder what an anthracite one would look like? Might have to have a go on photoshop lol

EssexClio · Feb 26, 2013

Re: Silver MK3 TCE Progress Thread

ksykes23 said:
Right, finally......

So glad to have them on Took a while but they were fitted today. Got a little bit of posh camber though :s

Gonna get it tracked tomorrow though so see what the damage is, then will look for either spacers or try and get some camber bolts made up to solve it possibly.

Looking fresh <3

ksykes23 · Feb 26, 2013

Thanks bro, picture doesnt do it justice tbh, will try get some better ones soon

hows yours coming along bud, got the springs yet?

cliokam · Feb 26, 2013

I like that a lot mate!

ksykes23 · Feb 26, 2013

Cheers man

springs are settled nicely now so so just need some spacers for the backs

nowhere near as shiny as yours though

looking mean in them new pics btw!

EssexClio · Feb 27, 2013

ksykes23 said:
Thanks bro, picture doesnt do it justice tbh, will try get some better ones soon hows yours coming along bud, got the springs yet?

Progress has been put on hold for the minute due to few unexpected problems :dapprove:

nick172sport · Feb 27, 2013

Re: Silver MK3 TCE Progress Thread

ksykes23 said:
Right, finally......

So glad to have them on Took a while but they were fitted today. Got a little bit of posh camber though :s

Gonna get it tracked tomorrow though so see what the damage is, then will look for either spacers or try and get some camber bolts made up to solve it possibly.

Love those wheels - suit the car perfectly!

Lawro · Feb 27, 2013

Really like that.. Those wheels suit the MK3 to a T.

ksykes23 · Feb 28, 2013

Yeah man, love the wheel, my favourite part

plus havent seen them on a mk3 before

Toby · Feb 28, 2013

Like that mate, suits it.

ksykes23 · Feb 28, 2013

EssexClio said:
Progress has been put on hold for the minute due to few unexpected problems :dapprove:

Ouch, what happened mate? Yeah know what you mean, im on phone to AP trying to sort out my coilover issue

ksykes23 · Feb 28, 2013

Toby said:
Like that mate, suits it.

Thanks bud

Kiefer23 · Mar 1, 2013

Looks great Kieran! We have similar offset. Believe your leggera's sit out 1.5m more than my Turni's and I put 20mm Eibac hubcentrics on the back of mine and it sits great at the back. I could do with 5mm at the front though. 15mm if we had the wider S archs.

Click the pictures to enlarge and I have a protective lip on the tyre round the alloy that makes it pop out more.

Only just realised how reflective my car looks in those shots. Almost as if the car is transparent/made of glass lol.

ksykes23 · Mar 1, 2013

Cheers pal

Haha yeah the reflections are playing mind games with me! I'm scared to put spacers on the front till my camber is set up......bloody nearly torque steered me into a lane with a lorry in today.....scaryyyyy.

Kiefer23 · Mar 1, 2013

Ouch luckily I don't have that problem with my poxy 1.2 N/A engine lol. The guy at the garage aint working today mate. Will let you know when I get hold of him.

ksykes23 · Mar 2, 2013

Little bit of an update. Managed to get the positive camber sorted today and now totally love my car

feels completely different! Turns out i had +2.5 degree on both front wheels and 11degree toe out.....no wonder it handled shockingly!!!

also for anyone wanting to know....there is no info on here about camber adjust on mk3 ap coilovers.....they are in fact Camber adjustable to a point. The top bolt hole on the strut is slightly wider so there is room to play. You can also get camber bolts for this car....they are the H&R triple c bolts....just some knowledge to help you out

i also had my front and rear diamonds out and wrapped them today and will put them on and get photos tomorrow!! All in all....very good day!!!!!

dannyb2012 · Mar 3, 2013

Pic 10 nice ride height

dannyb2012 · Mar 3, 2013

Only joking myns a 4" gap with standard 16s putting 17s on how do u lower with 17 any ideas

ksykes23 · Mar 3, 2013

Lol yeah pic 10....rolling high! In regards to ride hight, you could either buy springs or get coilovers. I have coilovers and would choose them over springs any day! With 17's, the car is gonna be higher off the ground anyway than if u had 16's so in that case, i would definetly say coilovers because with springs it will look like roller skates

ksykes23 · Mar 4, 2013

Just a few pics of the car with the tacking done now and my renault badge anthracite. Hardly professional but a few shots anyway.

Let me know what you think

(Btw, i know i need spacers for the rear)

Kiefer23 · Mar 4, 2013

Looks great Kieran. Rear spacers will set it off nicely and I'm glad your garage man managed to sort the camber.

Dan... · Mar 4, 2013

looks good

how much is it lowered by?

ksykes23 · Mar 4, 2013

Cheers kiefer. Yeah, it just hadnt been fitted with consideration that camber was slightly adjustable. Thanks dan, umm iirc it has 2 coils left at the front then down fully at the back. Not sure what that is in terms of mm's but im pretty happy with it (minus the spacers which i will buy next month).....I can finally enjoy it now!

gnevnev · Mar 5, 2013

whats it like with speed bumps?

ksykes23 · Mar 5, 2013

Yeah fine so far mate, not hit one yet! But i know for sure it wont go over them triangle/pyramid bumps. I dont have a back box though, i bet it might scrape if i did though

gnevnev · Mar 5, 2013

ah thats cool mate. im thinking about dropping mine but not sure how far to go, my uni likes the pyramid speed bumps you see :'( will probably just aim for around 40mm

i also live on a farm... aha

ksykes23 · Mar 5, 2013

Yeah the roads are horrendous where i live as well mate. If you can get 45mm spring that would be ok. I reckon if u went as low as me u would defo have to avoid them speed bumps. Or u could get coilovers and adjust accordingly

gnevnev · Mar 5, 2013

yeh coilovers would be ideal but not sure i could justify the price atm! not planning on going too mad anyway, just not that happy with the standard clio height

thanks for abit of inspiration anyway

cars looking very nice

de-chav FTW

head over to mine if youve got a minute, its pretty much bogo atm tho

http://www.cliosport.net/forum/showthread.php?686453-Silver-mk3-thoughts-suggestions

ksykes23 · Mar 5, 2013

Thanks mate, really appreciate it

de chav ftw! Also, yeah the standard ride height is appaling, body roll is uncontrollable lol

I already have suscribed to yours mate

will keep my eye on it and help you out where i can

if u ever need something photoshoped just ask, love doing stuff like that

gnevnev · Mar 5, 2013

haha cheers mate, ive got photoshop but im not the best at it ha. in that case ill let you know when ive got some decent pictures

Kiefer23 · Mar 6, 2013

Your pics are making me want to go lower at the front. I think 1 coil was 5mm if I recall the mechanic correctly. I find the middle 2nd catalytic converter is the lowest hanging point in the car and is the first to scrape. Never go to the Shires retail park in Leamington, absolute MONSTER speed bumps. Standard ride height new Corsa's look like they're just a few mm from scraping on them let alone coil'd Clios!

Also do you remember how much it cost to colour code your side, front and back strips? Not as noticeble on my black clio but I still want it done.

ksykes23 · Mar 6, 2013

Get a piccy of under the car

Yeah, i had to find my way out of a multi storey last night because the up ramps were to steep

You should test how low you can go and get some pics mate......then put them in your new project thread

Yeah, it was £120 to do the fronts, sides and backs. Think this varies a lot depending on who does it and if you know them or not bud.

Kiefer23 · Mar 6, 2013

Thanks for the info. I'll try and get under the car and see if there is any marks. My mates carjack I borrowed won't even fit under the car anymore so I'm unable to lower it myself further (guessing the wheel has to come off lol?) and I might start on a thread tonight as I have the day off and bugger all to do lol.

Are you going Cliosport Saturday??

ksykes23 · Mar 6, 2013

Drive onto a plank of wood and you should be able to get a jack under it

yeah get it started mate, would like to see the progress!

yeah want to go mate, not got a ticket yet though, are you?

Kiefer23 · Mar 6, 2013

I've gave it him back as he needed it now. I'll buy my own eventually and keep that in mind

Making the thread now.

This is how she sits at the moment. So low my fat cat can't hide under there anymore! Yeah I'm going just need to buy tickets.

ksykes23 · Mar 6, 2013

Lol i think ive found the reason it wont go lower....theres a cat there

sorry, horrific banter

link me the thread when your done bud

Rob · Mar 6, 2013

Perfect wheels. Nice choice.

Superleggera'd lowish mk3

Attachments

Similar threads