problem with amp

[l0rd]

how the h3ll do i remove these

My amp is not working properly.

I need to check the capacitors for dry joints but the frkn mosfets are not willing to part with the sink which is the chassis. I have removed the screws and the covers.

The ones in question are below the screws on the sides.

How should i takle it?

problem is that my 6th output stopped working. Thought fk that i will use just the 5th. Lately the 5th would only work if i slapped the amp and later would cut out again.

The amp in question is an Infinity RA6006.

Other areas i should look on?

 

[Dink]

it's probably the thermal paste holding them on.

i'd try running it for a bit before trying remove the circuit board

 

[vazman1]

if its just the thermal compound use a thin blade and ease them away from the heat sink

 

[l0rd]

yes, forgot to update

I used a screw driver against the chassis as a leverage and managed to get the things off.

On my way to find the problem, noticed my multimeter is dead.



FFS