ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • When you purchase through links on our site, we may earn an affiliate commission. Read more here.

Fia Kill Switches



  Track 172 & Golf R32
Il be fitting x2 fia kill switches one evening this week on my track build. One on the head unit blank and the other on the left side scuttle panel.

Silly question but i just want to be sure.. can you wire these in series? and i take it a resistor per kill switch is needed wired to an earth?
 
  WRX
You only need one. It just has two pull cables/buttons off it, so one for the cabin and one for the marshalls.
 

Rystar

ClioSport Club Member
  2003 Clio 172
Sorry buddy what do you mean pull cables?

The car we had at college had an actual kill switch in the dash, then one on the scuttle which was like a dummy switch if you like, linked to the main switch in the dash via cables similar to those used on bicycle brakes and remote fire extinguisher pulls etc.
 
  WRX
There is one actual switch behind the dash with a knob that twists to operate the switch.. Then there is like you say, a cable which is connected to the switch from the outside. Pulling that cable operates the same switch.
 
  WRX
Yes generally they are like so:
There is the red knob that can be twisted by the driver, connected to the switch behind the dash. Attached to that red handle is a pull cord. Like you say a bit like a bicycle brake cable. That pull cord is the other end of the red pull handle fitted by your scuttle, which then pulls that knob to activate the switch instead of you twisting. In other words there is only one knob to twist, either you do it from the driver's seat. Or it can be done externally by pulling the cable.
 

Rystar

ClioSport Club Member
  2003 Clio 172
A Few stolen images from google may help visualize this a bit better...

figure2_finished_remote_switch_pull.jpg

http://www.mgf.ultimatemg.com/project_shed/images/part14/figure2_finished_remote_switch_pull.jpg

BATTERY%20MASTER%20KILL%20SWITCH%20FIRE%20EXT%20RED%20T%20PULL%20CABLE.jpg

http://www.mattlewisracing.co.uk/sh...TER KILL SWITCH FIRE EXT RED T PULL CABLE.JPG

Cable is run from outside of car, pulling the cable pulls the 'key' out the kill switch.
 


Top