Search results

Yes the front suspension strut. That chart is not correct for the 1.4 8valve.

cant edit the thread.. 1.4 engine. 8 Valve

Hey guys. Does anyone know the bolt spacing on a 1.14 8 valve. Ive heard its 52mm 56mm 58mm :unsure: Anyone actually know? Thank you ❤️

No it does not have air con, but ive heard they also still have them even without aircon and also if it has air re-circulation they have them. My heater has recently started to not blow much air so i'm assuming its getting quite blocked.

Okay so i think ive found it under the passenger footwell. It seems someone in the past has played around with it at some point as the screws are missing. Ive undone the clips but it wont remove is as it seems the 2 pipes are connected somewhere, which i assume are these udner the bonnet? Any ideas.

Ive looked under the scuttle panel but its just a big empty space, Ive looked under the glove box but still cant see nothing. Anyone know? Thanks

Well the engine seems to run noisier with more tappets. Just wondering if the GTX would be better for it or if there's any other oils people could suggest to use. I want the car to last! lol. :smiley:

Hi all. what engine oil would you suggest to be used on a daily 1.4 8 valve? Car is on about 97k. I used to use Castrol GTX 10W-40 Part, Ive recently done an oil change about couple weeks ago and decided to try Castrol magnatec 10W-40 Part which i noticed is A LOT thinner!. I'm Not 100%, but i'm...

Cheers Fairm, much appreciated!! :smiley:

Just waiting to see what amp the fuse is., Thanks :smiley:

Haha! oh dear :smile:

Helping a friend out with a few issues with his car, And also noticed the rear fog light not working. Looked at the fuse box and noticed there is no fuse for the fog light, could someone let me know what fuse is needed, 5,10,15 amp etc. Its a 1.4 s 2000. Thanks :grimacing:

Fit me a set of KW Coilovers to a 1.4 sport? And how much? (Worksop area as well actually) Pm me if you prefer Regards Tom

I cant really tell tbh, there is thread there, but it may have worn down just enough to not get a grip. I don't know.

So have come to notice that One of my wheel bolts does not tighten up, The other 3 on the wheel are fine. Ive tried a couple different bolts in the same hole but still nothing. Should i just buy a new rear hub from eurocarparts or something? HELP :neutral:

I thought so, just wanted to make sure as Ive heard a lot of different stuff.

Does anyone know what the bore size is on the GENUINE Oz F1's? I know the hub on the car is 60.1mm, but what about the wheel. I once heard someone say its 75mm which would be these...

Rb parked at KFC near ASDA Forest Town Mansfield 7:45pm ish. Roof was covered in dents, both wing mirror's was a different shade of blue, so was a lot of other panels. :eek: Couldnt see any CS stickers. No surprise if it is someone on here lol.

Thanks i will give that a try. I would but i cant get under my car, dont have any car ramps or anything.

...Or if anyone knows someone who works for Renault who uses these forums, that can pm me the part number, that would be great. :o

Hey everyone. I'm in need of a new lambda sensor but need to know which one. I know the make is Bosch, but Ive been asked to find out if my car is using a 3 or 4 wire sensor. mk2 ph1 2000 1.4s 8v If anyone knows, thanks!

You are booked in again today at exhaustuk i see ;) Hope it all goes well!! :rasp: I was there a couple days ago again having something done to my car. Missed you and the Cliopreza by a few days!

***UPDATE*** HORN FIXED!!! :D:D I spent a few minutes earlier today thinking, trying to backtrack on what i could have done to the car during install to stop the horn working... I remembered a few days ago when i disconnected the battery, i dropped the spanner down into the car on the...

I didn't remove the steering wheel. Like Carl said, i just removed the little plastic bit of the top to get to the last remaining 2 screws in the dash. Hi Mick, the horn was working fine before i started, and Ive never had a problem with it before. so I'm sure the horn is fine. Cant have...

2 woofer's and 2 tweeters. As far as i know the squib aint damaged, but not 100% sure.

Yes ive had a look, but cant find no loose wires or anything.

views 44 - 0 replies Bump

So ive finally got around to fitting me some new components a few days ago and now my horn is not working!. It was working fine before, never had an problem with it. Really frustrating Ive checked the fuse and it was not that. I must have caught something and not known about it when i removed...

Hey Mate, I met you at ExhaustUK.... I hope you managed to get that insurance all sorted out.. Loving this project and cant wait to see it completed. Looking forward to the video to. :D Keep it up! :rasp:

Haha thats sweet!.