ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • When you purchase through links on our site, we may earn an affiliate commission. Read more here.


frayz

ClioSport Club Member
Mate, i bought it in April with 8300 miles on. It had been wrapped in cotton wool for its entire life. Ive used it daily since and loved every single second of it :)
 
  Clio 172
She has 16k miles on her now mate. Im yet to find a cleaner example to be honest. However i dont really care for all that stuff. I just look after it like i would do anything else. Change its oil every 7k etc etc. Always wash it with only a mitt and 2 buckets, jetwash the underside regularly, only use vpower in it etc. Just a nice little car as my daily. Not afraid to use it though. Which is why shes going out to the ring :)




Yes mate, im Frayz on every board i use, easier that way. :)

Glad you like it mate. I assume youve seen The Bomber on PFord too? :)

which is the bomber, the impreza or the clio?
 

frayz

ClioSport Club Member
which is the bomber, the impreza or the clio?

Lol, the bomber is the Impreza. All in black, one eye and suitably ugly. Shes the bomber lol

Bloody hell, where have you bean* in that thing !?

Geddit ?

:eek:

Lol, i'll get your coat mate.

All over the place, i do 50 miles a day to/from work, let alone going to wales etc. She'll get a sh1tload more going to Germany in a couple of weeks :)
 
  Clio 172
Lol, the bomber is the Impreza. All in black, one eye and suitably ugly. Shes the bomber lol



Lol, i'll get your coat mate.

All over the place, i do 50 miles a day to/from work, let alone going to wales etc. She'll get a sh1tload more going to Germany in a couple of weeks :)

in which case, yes mate have seen the build thus far and very impressed, if only you could cure the mis-fire sound, lol
 

frayz

ClioSport Club Member
Yeah I guess it us reasonably common now. The stardard Subaru headers are very unequal lengths and that's what provides that distinctive flat 4 beat. You can literally hear every single firing stroke. Fully equal length headers completely delete that sound. But also have the effect of moving the power to the right of the graph. Ie right up top of the rpm range. Mine are almost equal so it still has some of that flat 4 beat down low. However when above 3/4k rpm's the noise becomes more like a race bike than anything else. The advantage of the slightly unequal lengths is that it keeps more of the power in the midrange area while sacrificing a little up top. With 2.5 litres and a 65lb per min compressor wheel I don't think power will be of any shortage.

Well not for a road car anyway lol
 

frayz

ClioSport Club Member
Taking her Nurburgring virginity!!

Daily whip has been ring prepped lol,
Brembos discs, Performance Friction 01 pads, Goodridge lines, RBF600 fluid and Federal 595 RS-R rubber.
I head out on Thursday, cant wait to get back out there, :)
Ringready1.jpg

Ringready4.jpg
 

frayz

ClioSport Club Member
Treated the 182 to some love today.
Her Turinis have had a gloss black colour change with new Federal RSRs and discs & pads.

Even treated the old girl to a wash :)

95d0063b.jpg

95bab976.jpg

9c4bac97.jpg
 
  RenaultSport 172
How did you get on at the ring?
Wheels look great. Just put gloss black superleggeras on mine
 

frayz

ClioSport Club Member
Car performed fantastically at the ring. First lap in 3 years with a 90kg passenger, traffic and roadworks was a 9:40btg.
Best part was I had loads of fun, lapped hard and it cost so much less than the impreza.
 

frayz

ClioSport Club Member
Fast forward 4.5 years!!

Well I’ve had a strange thing happen last weekend. Basically I sold my old 182 to a friends brother 4 years ago (Downgraded to a Mini GP), he still owned it and has continued to look after it, largely it’s pretty much as I sold it. It’s picked up the tiny door ding and such, but other than that, she’s pretty straight all be it on 111k miles now and wants the odd job doing.

I’ve joked with him for a while about a straight swap with my ST for the 182. This usually results in the odd picture message/ text to eachother having cleaned our cars saying “cleaned your new motor, when we swapping? Etc” haha.

Well after I put up the ST for sale he said he would be tempted, not because he really wants an ST. His wife thinks the ST is a bit more grown up and it’s arguably newer and in better condition than the 182, is twin daughters are 9 years old now and the extra room in the rear was welcome.
He said he wouldn’t otherwise sell the 182 but knows what that car means to me and he’s open to the idea of a change. He knows the condition of my cars hence the Clio hasn’t let him down in the 4 years he’s had it.

Anyway, we agreed a swap cars for a week or 2 to see if he likes the Fiesta and if my rose tinted memories of the Clio 182 hold true.

So there i was feeling like I’ve gone back in time as my old inferno orange 182 sat on my driveway. Trying desperately not to get too attached as I had to be prepared for him to say he wanted to keep it.

Im delighetd to say after a week of trail run, the ST suits his needs better and we have agreed to exchange cars.
So having owned this car from 8k miles, here i am and its soon to be back in my ownership.

It’s a very strange feeling, but being in it just feels like home.

31a35c1d-c7da-4a38-acc1-d89f746e8dbc-jpeg.25193
 

frayz

ClioSport Club Member
Well,
It’s still here and I’ve found all sorts of little jobs to do, even though I haven’t even signed the paperwork on it yet.

Fixed-welded exhaust, ordered new exhaust hanger for the BTM.
Fixed all the heatshields, made new extra large sections to act as repair washers.
Fixed Alpine headunit (mic had fallen out the back)
Fixed airbox (garage had left it loose)
Replaced foglights with new OEM Valeos and PPF filmed them
For protection.
Refurbed the headlights.
Jetwashed the underside.

Cleaned a lot of stuff too, although needs de stickering and a Polish.
More bits in order to try and make it as fresh as possible again.

View attachment 25221View attachment 25222View attachment 25223
 

frayz

ClioSport Club Member
All sorts of little odd jobs I’ve found but too much to list.
Tracked the exhaust rubber for the BTM system down to that for a Honda. So ordered one of those.

Silly things like removing the windscreen seals and cleaning behind them.
Soaking the seatbelts with APC and jetwashing them silver again.

Keen to put my mark back on her, I took a few stickers off and added my Ring sticker back on the rear of the car. Also added some Speedline decals to the rims.

Yes I know the R needs a clean after doing rain duty last week to get the Clio exhaust fixed. Haha

60DB15DD-5896-4824-873A-005795189BF0.jpeg
713ABF44-0D2A-4549-B01E-F4CC959C4AAE.jpeg
B5548A9A-D921-4709-817F-AF7D0529FB19.jpeg
71847799-EA8C-4DA4-A277-6D8EF78BF28E.jpeg
D84AD5EF-A1D7-4E5A-BAB9-8C9F51128BE0.jpeg
2088B8AD-33DF-4706-90B9-910D918630AA.jpeg
 

frayz

ClioSport Club Member
This mornings jobs were to try and eliminate the boot/parcel shelf rattle. (Of which so far so good)
The tailgate rubbers were shot, one was missing and the other was hard as nails. These are still available from Renault and at a cost of less than £5 for a pair, the new soft rubbers mean the tailgate closes with a much less aggressive thud.

Also traced the parcel shelf rattling up and down against it’s mounts and tapping the top of the inner tailgate trim.
I used some soft side Velcro on these panels to cushion the parcel shelf and now it fits snug.

Popped down to see a good friend of mine Boyd @ BR Car detailing for him to ceramic coat the newly restored headlight lenses. This should provide years of UV protection providing I continue to look after them.
He based alongside GT101 who specialise in sales, service and performance for all things GT and Mustang.

The obligatory “knife to a gunfight” photo was required. Ha.

09803216-AEB4-4AD5-9165-7749C69AA2DA.jpeg
7EE4983A-8ABD-4083-B7A6-3514F3BDE810.jpeg
B06B5076-0EA3-49D2-B656-6D4B56B9657E.jpeg
F5AC516C-6ED8-4011-9BC0-B99997CBDCA0.jpeg
 

frayz

ClioSport Club Member
Bit more done on the 182 today.
Freshened up the arches with some new liners, cleaned out the sills and skirts.
Gave everything a liberal coating of Waxoil and added some Kaylan stone guards.
Used these on quite a few cars now and they offer discrete protection without having full sized flaps fitted.
Used just the OEM fixing positions and the top of the guards is fixed right to the body using double sided body trim tape.

Also renewed some more PPF on the R today and had to give it a wash as it had been on Clio support duty in the rain last week when I took the back box off to be welded.

Anyway, I’ll let the pics do the talking.

ED4CA4BF-CEED-42DB-94BB-C62988E9B7B8.jpeg
997361FC-A8DE-4014-B570-2C6BA5101953.jpeg
784B79CB-7DC7-4A0C-B0E5-137B726C47C7.jpeg
360AF233-28CB-40FD-9572-3A6B0551512F.jpeg
9D450E18-62A9-4C9E-AEE7-5A2A11F4AA82.jpeg
87FF785D-379A-4188-B2E8-B682284D4028.jpeg
63D3D2BD-8ECD-4C46-B37B-BA8B0DD19441.jpeg
3E914DF7-6D49-4F42-8BAD-ABB3C52D0A80.jpeg
 

frayz

ClioSport Club Member
Keen to give the old girl a freshen up, the first of more boxes of goodies arrived today.
I last freshened all the dampers and topmounts at 74k miles. She’s now on 112k so I figured I’d do the same again.

Pair front complete Cup lower arms
Pair front Cup dampers
Pair rear Cup dampers
Pair revised front topmounts
Pair revised topmount nuts
Pair inner track rod ends
Inner/outter ARB bushes
New rear numberplate lamp.

Obviously the lamp was all I could fit tonight, so that went straight on. A vast improvement, I’m sure you’ll agree.

E7AD7A52-C19D-4209-AE06-DF344506D9A7.jpeg
B7BB1365-7A98-4B84-AFFE-3EBB5EAE2CDD.jpeg
36A33E12-7926-4AA0-BF11-400BC7E46B32.jpeg
1FD0ADB9-03A6-458D-9794-E81CDE6C82B3.jpeg
C581B071-FF99-4E2F-84F5-3725F0E50012.jpeg
 

frayz

ClioSport Club Member
Only a small update on the 182, bit of poor show on my part really as I forgot to take any before pics. However I had all the little dings I found on it taken out today. 2 on the drivers door that were visable. One on the passenger door and 3 on the bonnet that were barely visable, but I’m fussy. Used a guy I usually use for this and his work is superb.
She’s now arrow straight again.

Also saw how poor the OEM earthing setup is, so I made up a much thicker earth strap to the chassis ground and I’m going to make up another from engine/gearbox to the chassis ground. It may be placebo that it feels smoother to drive but I’m 100% it isles much nicer.
Also the R was due a plug change, so swapped those out. The ones I took out were pretty mint to be fair, hardest part of this job is getting the rear wheels off. Lol. OCD found me hoovering behind the wheel liners, but hey, we all do that, right? ?

BE2D9135-8433-457E-A4C8-43CCD35EFA5F.jpeg
93949EC9-905F-4D44-ABD8-12297C4C3B34.jpeg
E95824BE-37D5-4A14-87EE-230D4A9BF846.jpeg
0CE80EFE-3D61-45C0-A8DD-791A19B684C5.jpeg
 

frayz

ClioSport Club Member
Nothing much, however I collected some small bits from the dealers in the way of some blanks for the bottom of the tailgate to finish the holes.
Also collected new rivets for the skirts as I want to have them off to clean/underseal and refit.
The OEM Black rivets are no longer available and have been replaced with these silver ones. Not too happy about that to be honest, so I’ve ordered a box of black peel rivets and hopefully they will be more in keeping with the OEM finish.

I’ve also contacted Renault UK to see if I can track down replacements of the vehicle ID stickers inside the drivers door shut and the under bonnet decal. They’re coming back to me, so hopefully with a favourable reply.

AA5F7FD2-D7A3-4363-B9E2-D920C2D9BFD3.jpeg
F66F7AFB-D8FD-45A5-B68E-E0FFC052F4E0.jpeg
207F79E1-4350-47D8-9B60-0ECF65BD97DB.jpeg
5EB8CF6F-E837-4595-ACDD-642256F1D9BA.jpeg
AF972FDB-A544-4B1D-9BD8-6BE5216C4D17.jpeg
 

frayz

ClioSport Club Member
More parts arrived today in the shape of a new OEM Centre mount for the exhaust and managed to track down a pair of genuine Cup washer blanks.
These are notorious for breaking so I’ll fill the thread centres with resin and internally sleeve them.

Just need to decide if I paint these satin black or body colour.

588D95C5-0ADB-4CA6-97AE-40271D4C009E.jpeg
7F3A0177-E83C-4986-96D8-4C0A1F86FC90.jpeg
 

frayz

ClioSport Club Member
Another job I’ve been meaning to do is get the rear panels off to check the state of the sills from inside.
Happy to report there is no corrosion in here at all. So just a quick hoover round, clear the drainage holes and a liberal coat of Waxoil.
I will however order some Bilt Hamber and revisit these areas to get them properly protected.

9506299F-DE6A-4D7E-9D08-768E627FC125.jpeg
E6EAA261-3507-41E2-A345-0BFE19F6F357.jpeg
C957FD96-F89F-402D-8D33-3A5532242A15.jpeg
 

mart.z.s

ClioSport Club Member
  Audi A3 2.0T Quattro
Easy enough to get off? Been meaning to get around to this. Glad you didn’t find anything lurking in there!
 

frayz

ClioSport Club Member
Yep, dead easy.

Pull the rear bench lower sections out.
17mm hex for the lower rear belt fixings.
TX40 for the lower front belt fixings.
Just give a gentle tug all the way around the rear doorcard and they pop right off.
Mindful to unplug the rear speakers before taking the doorcards fully away.
Small foam sound deadening pad behind that isn’t fastened in so comes right out and there you have full view inside the rear qtrs.
 

frayz

ClioSport Club Member
Not much to update but a few more odds and sods.

Wen I first owned the car I fitted what was at the time a pretty high spec Alpine HU. FFwd to now and I wanted one that would stream from my phone as well as have a full high speed iPod connection.
So swapped out the CDE-113BT for a CDE-178BT.
Also fitted a new prototype poly dogbone from Phillip M. This is really quite impressive, much improved gear selection and control of the engines torque reaction. However absolutely zero increase in NVH... it’s wizardry I’m sure.
Swapped out my OEM aerial from that of a latest gen Fiesta to keep the OEM+ type finish and finally swapped my orange Speedline decals for some white ones.
I really liked the idea of them in orange but wasn’t quite convinced once fitted. Personally I like the white better as it looks more OEM to the Speedline wheel.

Big service to come this week from Alex at AW Motorworks so looking forward to getting that done too. ?

D93473D0-8E1A-42CF-8FED-C418C2CBB1AC.jpeg
56120A25-9323-46A0-9412-CE89887BD9E9.jpeg
D755FC7E-F878-44C2-9F52-0CE55C5208A1.jpeg
5B80D434-8882-4AD6-BE98-9F58CC8CD3CA.jpeg
EADF98DA-EAF7-4926-ABE1-8B66A26438B2.jpeg
9609DB4B-AD90-4C2E-8779-F3CE7871D4EF.jpeg
7DC45D31-6BC7-444D-A672-3109719E6368.jpeg
 

frayz

ClioSport Club Member
Dropped the car with Alex at AW Motorworks tonight for a few days. She’s in for a fair bit of love.

Cambelt kit.
Aux belt kit.
Dephaser pulley.
Cam oil seal kit & caps.
Crank bolt.
Water pump & Antifreeze.
Full OEM clutch kit with release bearing
Gearbox oil
Engine oil/filter

All being well she should be back by the end of the week and feeling refreshed. :)

Also means I’ll have to use the R for work for a few days.

Please don’t rain
Please don’t rain
Please don’t rain
:D
 

frayz

ClioSport Club Member
The usual awesome service from my good friend Mark @ MarkOne Graphics. He made my original plates 8 years ago and has just made a new pair to freshen the car up once more.
He also made me some “made in Dieppe” decals of which I may/may not fit.
Got this idea from the Porsche GT boys some of whom fit “made in flacht” to the rear of their cars. A google search brought up some barcode designs, so went with those.

E33BA111-C219-4ACE-ADCB-73020C79AFC3.jpeg

AF709F18-7E7D-4FB4-B988-B1A859E55048.jpeg
 
  Clio 172, Abarth 500
Very cool idea those barcodes! Where you thinking of putting them?

Also love that table! Looks amazing!
 


Top