ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • When you purchase through links on our site, we may earn an affiliate commission. Read more here.

Jekyll's RB182 Progress Thread



  182 Cup
I bet mate!! Should look great. Get some pics up when they arrive and are fitted.

Are they et38 or et43?



They are et43, going for Pilot sport 3's as I have some OZ F1's with R888's on for track days. I know it won't sit as sweet as yours but fingers crossed they won't look totally lost in the arches.
 
  182 Cup
I bet mate!! Should look great. Get some pics up when they arrive and are fitted.

Are they et38 or et43?



They are et43, going for Pilot sport 3's as I have some OZ F1's with R888's on for track days. I know it won't sit as sweet as yours but fingers crossed they won't look totally lost in the arches.
 
  182 Cup
No none at the moment, I guess it's just a case of fine fettling with it. Recommendations on best front and rear type spacers to use??
 

Jekyll

ClioSport Club Member
It's not necessarily better with wheels, it's more what you prefer.

Me personally I prefer the stud and nut type. I take my wheels off a lot and I find it easier as you just remove the nut and the wheel still stays in place on the studs. But some prefer bolts and the look of them.

But seen as your running bolts now, then I would go with 20mm front spacers and 10mm rear hub spacers. And I would also go for a bolt to hub type. In fact, I had H&R 20mm spacers on my old ph1 and I would recommend those (DRA+). They are well made, lightweight and have steel inserts for added strengh and being a bolt to hub type, means you still get to keep your existing bolts.

10mm rear hub spacers will be great as they push the wheel out nice and is a nice size. You can always add a 5mm wheel spacer if you want a bit more out but even with both, you can still use your existing wheel bolts. The H&R's aren't cheap at around £100 but they are worth the money.

If you decide to get hub centric, non bolt to hub type, then you would need longer bolts to suit the added spacer size.

2018-02-23_10-11-53.jpg
2018-02-23_10-13-03.jpg
 
  182 Cup
Top advice bud, i really do appreciate it. My wheels should be through within 10 days so will get them on the standard cup shocks, cook springs and I'll get some photos up. H&R looks good quality in all fairness.
Would love to see your car in the flesh one day soon!
 
  Alfa GTA
This car is awesome! Loving the updates, I'm glad I'm not the only one with problems when coming to fit new/uprated parts, there is always something that goes wrong or a clip snaps ha!
Keep up the good work :)
 

Jekyll

ClioSport Club Member
Haven't updated this in a while. Not a lot has happened tbh apart from a lot of picture taking!

So as the car is a daily, i braved the weather when we had the beast from the east storm. AD08R's in the snow aren't that bad. Rule is, don't drive like a knobhead and you'll be reet!

Of course i grabbed a few pics during the cold season!

39814180294_f24d9cc461_z.jpg


25690462707_fc8f085b4a_z.jpg


25690451137_b42f7b57e6_z.jpg


39665789775_d2f8f68961_z.jpg


40518318122_381ee7c75e_z.jpg


40518314962_548f820e32_z.jpg


40545507002_fb102a5409_z.jpg


25717085037_049e21eb88_z.jpg


One thing that's bugged me for a while was the ph1 indicator stalk i had, had worn away on some of the symbols. These tend to go for around £25 now for a sport one. I managed to get a non sport ph1 stalk off ebay, in better condition, for £7! This one was from a non sport and the only difference is it doesn't have front fog light switch, which suits me as i've removed mine anyway.

27186679358_61d1c23c77_z.jpg


Old

41057635871_bdd8299147_z.jpg


New

39249159180_bfcc6af7bb_z.jpg


All fitted and working as normal

39249157200_860900cafe_z.jpg


I treated myself to a new (2nd hand) camera so over the last few months ive taken various snaps of the RB. These are some of my recent favourites, with the new camera and my other one.

40600349254_c0aac748b8_z.jpg


40600346814_181499ba0d_z.jpg


40418328025_d6f1cf3cbe_z.jpg


27478709548_f47705edac_z.jpg


27609006568_408719af09_z.jpg


40767023354_e726eb921d_z.jpg


39847712190_4b4940b97e_z.jpg


27786540558_cd317f1fc1_z.jpg


39847664090_aa24e496d1_z.jpg


41654517241_b9bc00816d_z.jpg


26442258447_32eeecff11_z.jpg


40944316114_c6319c5c2c_z.jpg


40944319604_228ede0a07_z.jpg


I have decided i need the speedline decals back. I spoke to the chap who i bought them from (Baz Thorn/Speedline distributor) nd i've ordered 8x genuine decals in blue so i can go back to the original look again.

Now the car is not mint. The pics make it look better than it is. Its just ticked over 126k and while the bodywork is in decent condition for its age and mileage, it does need some attention. I noticed a few months back that i've developed a little bit of bubbling on the rear arch. I know the car has had a repair at some stage in its life as the rear quarter and bumper has been repainted and not the best either. Rather orange peely and in some lights, the bumper is brighter. I must admit, its never bothered me that much, however this will now be addressed as i want to remove the bubbling paint and kill it before it gets worse.

41810792531_5e15b6a64e_z.jpg


41768834542_43363407bd_z.jpg


The near side has a small amount too but it was hard to picture as it really is small.

41768831702_3051b75bff_z.jpg


So having a paint booth at work and having guys that are good at what they do, one is doing the repairs for me as i dont know bodywork, apart from the basics. I will hopefully be getting the bubbling removed this weekend. We have spoke about painting both bumpers too but will will do that at a later date and just concentrate on the repair work for the time being.

26656282977_73633f6e2a_z.jpg


40812705944_e85994a66e_z.jpg


When the bumpers get repainted, i will buy a new fabia splitter and rear number plate light so its all fresh. I also managed to pick up a renault tunepoint. This enables you to have a usb stick that can go into the original head unit and replaces the cd changer. I still had original head unit and wanted to get rid of the Pioneer one i had for a more oe look.

41810901081_0916b35455_z.jpg


40003788300_4b9789918e_z.jpg


41792242642_5eec65a179_z.jpg


26966239977_d3d2014834_z.jpg


26966237197_449f7e034d_z.jpg


Ive velcro'd the tunepoint under the glove compartment so its all hidden. Yes the original head unit is manky, it suffers from the tackiness from the soft touch film the sports have, but i will swap the face for a non sport one as i believe the face is a straight swap.

26986648767_ded7ca7068_z.jpg


The old head unit and extras are for sale here if anybody is interested:

https://www.cliosport.net/threads/pioneer-head-unit-and-all-leads-extras.818182/

Also I've recently joined instagram (couple of months ago) so if you want to see more pics of the RB amongst other things then the user name is: drj_182 (shameful plug in!)

That's all for now.

Mark.
 
Last edited:

imprezaworks

ClioSport Club Member
  Mk5 Golf GTI :)
Shame about the quarters. Have been done before but hey it’s an old car and you will make it look like new I’m sure :)
 

Jekyll

ClioSport Club Member
Yeah it is and it isn't. I've always been honest about it having paintwork in some form of it's life. Fortunately it can be fixed. Let's be honest, I'd imagine most cars of this mileage have had some form of bodywork in the past.

Being used as a daily, I'm not going to get every panel done. I'm not chasing for a mint car, just a clean one. Once these parts are dome and both bumpers are repainted, I'll be happy.
 
Great photos mate! Should be good when the paintwork is corrected etc as described above - regards the stereo, this now makes sense lol, when I saw on fb you were selling the aftermarket unit this did raise a question mark. The photo of the tunepoint removes said question mark! Lovely bit of oem there while still being able to listen to the more modern USB ting!

(Says he who only has a CD/radio Alpine!)
 

B-shaw557

ClioSport Club Member
Love this picture...

40944319604_228ede0a07_z.jpg



Love an OE stereo me, part of me wants an aftermarket one but it'd annoy the hell out of me not having it on the screen where it should be & possibly not having working wheel controls!

Damn I love that V6 spoiler too

Followed on insta ?
 

Jekyll

ClioSport Club Member
I deeply, deeply love this car. It just looks so right.

Thanks mate, that's a proper nice comment to read ?

Awesome photos as usual mate! Just love how clean the engine bay always looks

Thanks mate. I think I'm getting better at the pics. I do think just a little paint definitely tidies up the engine bay ?

Great photos as ever. Car looks spot on, especially for a daily driver.

Thanks mate. Sometimes it's hard to keep the white 2118s clean and I do sometimes think that maybe anthracite would be better for the daily drive but I feel that white wheels is this cars identity.

He doesn't fancy doing my paint work does he mate!?

I'll be honest Steve, this is a favour for me. Chris might want to do a PJ, but I know Will doesn't particularly like doing them.

Great photos mate! Should be good when the paintwork is corrected etc as described above - regards the stereo, this now makes sense lol, when I saw on fb you were selling the aftermarket unit this did raise a question mark. The photo of the tunepoint removes said question mark! Lovely bit of oem there while still being able to listen to the more modern USB ting!

(Says he who only has a CD/radio Alpine!)

Yeah I'm hoping so mate. It's never going to be a minter, more a used car that's trying to keep clean the best I can. I'm not into detailing so it's all hand cleaned.

Regarding the Tunepoint, they was like gold dust at one point. I gave my old one away. This is why I kept the original head unit, just in case one turned up. Oddly enough, there was a few for sale when I bought this one. If I can find the thread (on the Facebook group but can't remember which one) I'll tag you in it.

Always interesting updates.

I plan on copying the Renault Tunepoint...

Do it mate. As above, there was a few going for sale recently.

It just gives you more music option rather than 6x CD of the changer. My USB stick has about 2000 songs or so, so I got plenty to choose from while retaining the OE look.

Defo tractor broom damage :)

Haha you fool. I don't use the brush, I'm a bucket a sponge man!

Love this picture...

40944319604_228ede0a07_z.jpg



Love an OE stereo me, part of me wants an aftermarket one but it'd annoy the hell out of me not having it on the screen where it should be & possibly not having working wheel controls!

Damn I love that V6 spoiler too

Followed on insta ?

Well with that patch lead, it gives you the stalk control so you can retain that. Instead of track 1, 2, etc, it just used to say Renault. But the track listing was on the head unit anyway. Certainly a must have if you ever fit an aftermarket unit.

Regarding the spoiler, it came with the car. It's not a genuine one and at first I was unsure I actually liked it. I contemplated changing it for a cup one, but the more I looked at it, the more I liked it. It's for keeps now as I think it suits the car.

Yes I saw that Toby, and I liked what you put up too so I followed you back!
 
Last edited:

Jekyll

ClioSport Club Member
In other news, we attacked the arches today and I'm happy to say that it's turned out to be surface rust. We pulled the sills off and there is no rust on there either.

So far the car has had the arches and fuel area sanded down and primered. We plan to stay after work and get the arches, fuel area and possibly rear bumper painted tomorrow.

All is not good though. I think my exhaust is slowly giving up the ghost. It's a cheap system that came with the car. Its not the best made and its cracked in the center section before, however this time I've found another crack on the tailpipe. Its 2.25 bore and I actually like the sound of it. It's not intrusive at all and has served me well over the last 2 years but I think it's slowly dying. I don't think it needs changing just yet so it can wait for a while but in my head I had a list of things I want to do to the Clio this year and this has clarified that it's one of them.

Will upload more pics/progress this weekend hopefully.

20180503_180232.jpg
 

yeecup

ClioSport Club Member
  mk8Fiesta ST,172 cup
Car looks just so right mark. My favourite Clio colour and wheels. Love it.
 

Jekyll

ClioSport Club Member
A pleasure. If I could own any car off the forum, this one would be right up there

Thank you very much mate. That's a real moral booster. Nice to see that being written/spoke about as there's plenty of nice cars on here.

As I've always said, it's not a minter and mileage isn't low (as such) so it since to see people love the car for what it is.

No worries mate,do another little road trip soon when your up for it now the weather is starting to get better.

Yes mate. I think we'll have to forward plan it as I seem to be busy all the time! But I am up for it it ?

Car looks just so right mark. My favourite Clio colour and wheels. Love it.

Thanks Jamie ?

RB next for you then?
 

Jekyll

ClioSport Club Member
More updates and many pics.

So i got the RB in work to start the paintwork. We decided that seen as the bodywork was in good condition barring the issue, it didn't need filler work. What we did was grind out all the rust, primered the area and blended it in. Sounds a bit half arsed but i didn't want to do extra work if it wasn't needed. I'm not going for a show queen car, i just want the rust gone before we have anymore issues. Ill be honest, i cant even tell where the rust was before or even where its been blended so im happy with that.

40128281280_3a7015c5ec_z.jpg


40128275740_8766d270e6_z.jpg


27065816587_3e20ff59c9_z.jpg


We also did the fuel cap area too as that have some very small patches.

28064262428_18b72a4bdd_z.jpg


Rear bumper being done also.

28064255378_30d5199ee4_z.jpg


And in the booth.

28064252938_f65405c9f7_z.jpg


41036100445_fd29d5d6c7_z.jpg


28064247338_bf1d7563e0_z.jpg


41036088295_b24b647f01_z.jpg


41891270202_d85c98ba21_z.jpg


41891273892_8fb3eebafb_z.jpg


28064235008_68cf42a4e5_z.jpg


28064232978_6e5bdf85a4_z.jpg


28064228778_4b7bbc39da_z.jpg


28064224868_68479581a4_z.jpg


28064220418_6c2907cbb0_z.jpg


28064216808_451b76a4ea_z.jpg


41036132395_3efa81df47_z.jpg


41891253272_d2f9d71f45_z.jpg


We finished around 12pm friday night and decided to leave it until sunday morning before we fitted it up. No pics of that process but i got a shot after it was all back together outside the workshop. We had a mk1 escort in and i thought this was a cool shot.

40128285730_6be8801909_z.jpg


Its not been flatted or polished yet. Although its a colour match, it does seem a tad darker compared to the door. i'm hoping that its just against faded light on the old panels and with a decent flat and polish and a polish of the other panels, it'll be sweet.

I bought a 2nd hand non sport stereo to it. Mine was sticky as hell so i gave it a good scrub to remove the stickiness, which worked but it looked s**t, which i knew it would. This didnt bother me as i knew the replacement would only be a few days before it arrived.

41370244424_cb38b4891f_z.jpg


Non sport head unit arrived.

28216749198_5478c95d0b_z.jpg


I read that non sport head units dont work in sports, but the faces are the same so thats what i bought it for. So i removed the old one, got them on the bench and swapped over the faces.

41370285544_804ab1f8b1_z.jpg


28216742988_fff7eaa694_z.jpg


41370272474_ff8bed59bd_z.jpg

And fitted. No more stickiness and it matches the rest of the non sport stuff ive swapped over too.

41189321475_08f02d9907_z.jpg


41370260774_f55d5198ee_z.jpg


All that was left to do was the climate control panel. Although i had a non sport, as you can see it was black and i wanted grey.

I had leftover paint so im going to get my front bumper done as it has chips and scuffs all over. I bought a new fabia splitter to fit when its been painted. Annoyingly my current was fitted by someone else and they fitted it from the end, so one end is a nice finish and the other end is cut. The new one will be fitted from the center outwards and cut either ends.

41370256594_59de62947c_z.jpg


I also bought a new number plate light to replace the old one. TBF the old one wasnt that bad but i got excited because i had new paintwork. I've yet to fit this.

27219817157_916aa48e87_z.jpg


And i treated the RB to the best of the smellies.

41370437524_33cbd55782_z.jpg


My old parcel shelf rattled. Not sure where, but the fitting was never great, even with the foam strip mod. I managed to find one for sale on here from @edwarj123 and fitted it. Fits a treat and no more rattles. Well its a renault, so it just means one less rattle!

40421359180_e4fd675669_z.jpg


I also wanted to order some new brakes as i wasn't getting the performance i liked out of my old ones. I wanted to get rid of the Pagid road pads i had, but didn't want to fork out for new DS2500's at £130, plus i've had them before so wanted to try something different. Contemplated PBS pads but they were more track focused and being a daily on white wheels, id like something that gives off less dust, so i opted for Mintex M1144's. My discs have never been changed in my ownership so i wanted new discs too while doing the pads so i got some trusty Brembo HC discs. The rear discs was only replaced last year so i just bought pads for the rear. While i was ordering, i though it was best to change the lambda sensor as the eml light kept coming on. I ran a decat and have the sensor in the heat shield and every now and again, the light comes on for a day or 2 and then goes, but this was on permanently. My little ODB reader clarified it was the post cat sensor. A quick message to the trusty @George@RTR_Parts and all of the above was ordered. As always, the service was spot on both in advice and price and the delivery was prompt. He has a great reputation and i've used him for year and i would preach if you haven't already, to do the same if you require brakes, sensor or powerflex stuff ?

41507073374_d6296df798_z.jpg


My exhaust was souning terrible and i needed one sooner rather than later. I did contemplate buying new but decided i'd look second hand to save some money. A ktec Ultra exhaust + decat came up from @Russ Rallye and a few messages of enquires and i bought it. Its dented on the center secton but not seen once fitted. Plus i didnt really want slash cut tailpipes and these arent. I'd seen 2 others for sale and they was the same price but no center section, which i wanted. All paid for and it turned up a few days later.

41327795825_9734f98313_z.jpg


41327794125_852acd364a_z.jpg


I gave it a good clean with a drill, variuos wheels and metal polish. Came up pretty good. I used a scoth pad and degreaser for the pipes to remove some of the tarnish.

41327792855_5ce93b0d6b_z.jpg


41327791145_9bd6d61b3b_z.jpg


I managed to find a grey non sport climate control panel. The buttons were worn but my current ones were decent so i swapped the faces and buttons over.

40421361840_393e0d29ea_z.jpg


28355726468_67ea1215ae_z.jpg


40421353600_532fe91b77_z.jpg


40421350300_768baf500b_z.jpg


41327800205_7234411353_z.jpg


I also ordered some Brass bushes for my BMS shifter from @Yanoo as i was told they was better than the standard ones. Stayed behind after work on friday and decided too fit the exhaust and bushes while the ramp was free.

41507056104_ec7b56c65f_z.jpg


You can see it was blowing here too. Needed changing for a while but there was no point until now really.

41507052634_69cb755632_z.jpg


It was a cheap made system which i've always known. Had to take a grinder to it as the center section was all one piece. Came off easy.

40421326980_25ba1936c6_z.jpg


Another crack. This is what caused it to have a horrible rattle at 2k.

41507050284_c550837742_z.jpg


And next to the replacement. I thought the old system was 2.25" but was actually a 2"! The ktec is 2.5" all the way through.

27357701787_2cee1186eb_z.jpg


While the system was off i fitted the brass bushes

41327901355_d1d1f6f6b5_z.jpg


40421482110_6f8d8dfc00_z.jpg


42228855241_25ca2ce9b5_z.jpg


41327892205_034817cbf0_z.jpg
 
Last edited:

Jekyll

ClioSport Club Member
Coffee and break time

28355855058_359bd50b12_z.jpg


Removed the old Lambda and fitted the new one

27357697277_f4297c44ac_z.jpg

Retapped the exhaust mount holes

41327885675_a6446f48e1_z.jpg


Seen as the decat was being fitted i taped up the lambda and fitted back in the heat shield Though this way its always clean.

28355849688_7ac113b6ca_z.jpg


27357856067_20498e47ea_z.jpg


Got the little code reader to erase the code.

27357850677_1d71065357_z.jpg

All fitted up

28355838628_2bb7018252_z.jpg


27357846567_f828a1ec4a_z.jpg


A few vids.

Start up



Reva and pull



And a quick drive by



With that all done i packed up and went home. Exhaust is nice. Has rasp and throaty sounds to it. You do get a resonating sound a 3k though. Looks good too.

The next day i went to work with the aim of fitting the brakes but i was curious to see what the Ktec would sound like with the cat in place. I still had my original so i took that to work.

28355835198_06d014d995_z.jpg


A quick mock up against the Ktec decat

42182445422_1d66f85181_z.jpg


And up against my old decat which i removed as the ktec system is sleeved, meaning this wouldn't have fitted.

28355828848_f013a3a24d_z.jpg


So after a measure up and knowing that it would fit, i decided to cut the old decat and use the material to weld ont my cat to make my own sleeved cat.

42182441582_b0afa55d82_z.jpg


41507043384_040a88d1a9_z.jpg


27357837157_366553a46e_z.jpg


42228959831_c0e1a46e44_z.jpg


41507151514_4f62a88850_z.jpg


42228949341_9b80e17be3_z.jpg


28355815078_a8b6d2511c_z.jpg


27357826827_6a719602dd_z.jpg


27357821657_a83e41f1c2_z.jpg


28355811308_bf4d7f9f90_z.jpg


I fitted the lambda into the cat as it didn't need to be hidden anymore.

42182425482_3c741e7cc3_z.jpg


Then i got the chap at work who was painting hes own bumper to drive it for me while i got a few vids. The cat hangs down lower than the decat but they always do.

28355806588_913a0122e7_z.jpg
Cat sag by Mark Abbott, on Flickr





After all that and a quick bite to eat it was brake change time. Ignore the condition of the brakes, im going to repaint them at a later date

28355802288_ed7f0d0b6f_z.jpg


Took the wheels and coilover covers off to give them a wash. Bilsteins still looking decent.

42182418212_ccca06bb4b_z.jpg


28355794878_d8fd89aef7_z.jpg


42182413042_5f672b90fd_z.jpg


42228908261_455339e9d4_z.jpg


Fronts done

28355783818_22b0867874_z.jpg


41507121014_a08965f41b_z.jpg


I had ordered some stickers from N2Grafix as my other stickers are not coming yet due to the chap being busy. He did apologise to me so all is good. Picked these up for £8 off ebay in medium blue.

Seen as the wheels were clean i decided to fit the stickers.

42228899051_3a7681deba_z.jpg


41507117344_9114517120_z.jpg


41327826935_e9d48c4734_z.jpg


42228888301_40daa26cfa_z.jpg


40421386280_f73589b054_z.jpg


Then onto the rear brake pad change.

41327821765_5428fbbc22_z.jpg


42228878601_38702444a9_z.jpg


28355754268_09606a4f34_z.jpg


28355751588_4a70111e6c_z.jpg
 
Last edited:

Jekyll

ClioSport Club Member
Lasty to fisinsh off, i gave it a quick washa nd hoover and got some pics. I am actually thing of putting the decat back on as i think it sounds better. Luckily its on 2 bolts and a clamp. I will say i feel it feels quicker since fitting the exhaust so thats good, plus no more baging and rattling!

40421376640_0e8ab1c5a9_z.jpg


40421373360_7cefeedcc1_z.jpg


41327811875_77e524e25d_z.jpg


40421368690_314210eeac_z.jpg


41327808825_5207c16511_z.jpg


I love this little car!

Thats all for now ?
 
Last edited:

Mr R.

ClioSport Club Member
  A special one.
Fantastic work as always mate, you've done so much work.

Are you going to the meet on the 6th?
 


Top