ClioSport Club Member
Clio 172 Cup&Leon K1
Well the brake line kit has arrived, I ordered blue but glad it’s come silver tbh but it’s missing the bias valve and gotta wait for that now
Nah he didn’t, he met me half way aswellSo, he didn't break it in the end then? I was thinking about buying the gearbox. Looks like a nicely sorted car.
Maybe maybe I need to look into cut off switches as I think that’s the only thing I’ll need that I don’t already have.That's great. Maybe see you out in the Tin Tops then.
As for the stickers, a heat gun and a ton of white spirit is all I can suggest. I'm sure someone on here will have a trick or two.
Thanks budJust had a read of this whilst on my lunch. Looked brilliant and no doubt will be even better once done.
as for the stickers use a heat gun and some sticky stuff remover - https://www.viking-direct.co.uk/en/p/VMK1029?cm_mmc=Google-_-pla_gen_cleaning-and-catering_gosc-_-cleaning-and-catering-_-VMK1029&gclid=CjwKCAjwo_HdBRBjEiwAiPPXpCXazajjbJ1gSfWCez6gGRJLGmWy2hhZJ5gy9cJ3DCLM0zHqrK6LohoCBjsQAvD_BwE
Also i may be interested in the redundant shell, where in the midlands are you?
Depends on if it’s the Evo rear beam. They had extra welding and plates to reduce twist - essentially the same theory behind a rear arb
As far as I’m aware this beam looks the same as a normal 1*2 beam but has a hub type bearing with separate disc rather than the bearing pressed into the disc.I’ve got a cup racer rear beam in the unit and it looks no different to a standard one but with spacers behind the stub axle
It will be a proper cup race beam mate. They changed the rear beams on the latest spec cars, and these had the additional plating and welding. Or at least that’s what I’ve seen on those cars.As far as I’m aware this beam looks the same as a normal 1*2 beam but has a hub type bearing with separate disc rather than the bearing pressed into the disc.
Is this a Proper cup racer beam?