cup

I have the single rocker type light on my cup. I seem to remember on my old 182 with the map light type, the interior light came on when engine was turned off and the key was removed from the ignition. To gain this function, is it simply a case of swapping out the interior light only? Or is...

Hey guys im considering lowering my 182 cup its a 2005 what is the diffrence with the cup springs and normal 182 springs are they the same or are they lower on the cups after general info thanks

This may be a bit of a stupid question but does a 172 exhaust system fit my 172 cup? I'm a bit of a r****d at search engines and I never find the right answer so I thought. just ask here and I might get a good answer so any help would be greatly appreciated thanks.

Okay, So I'm back in a 182! after owning a Subaru for a year which ended badly.. I needed a cheap and cheerful car while the scoob is off the road.. this time a Titanium FF and so far I'm loving it, it feels more looked after than my last clio, and easily more fun (useable/chuckable) than my...

Sorry sure this would of been covered but can I check, I've ordered rear discs for my cup (no abs) with rings fitted but they have the larger number of teeth than the ones currently fitted but as no abs sensor then in theory there not needed?? Can I just leave them fitted (46 tooth) or is it...

Before I potentially purchase some coilovers for the 182 can someone please have a look at these pictures. I've done a search and have come to the conclusion that I have the cup suspension but just want to confirm. Ps I hope these are the pictures of the right part!

Does anyone know where I can access wiring diagrams for my 172 cup, looking for engine, canbus & general wiring please

I take it I have measured the wrong bit but would I be right in saying these are cup hubs ?

Saw you earlier, black or anthracite alloys, loud "stealth" exhaust on Heene Road. Anyone on here?

Anyone ever fitted 25mm hub spacers on a cup before? Just wondering if there's clearance issues. Its already lowered by 35mm. Cheers

Looked lovely.

Anyone know what this part is? It's been kicking about for a while and know it's the in between pipe. Is it a genuine Renault MK2 Cup racer part? Sorry I'm a mk3 man so a little clueless on the 2s.

Anyone know the best place to get a gearbox for a Clio cup ph2 from and what price do they go for

Just wondering if anyone has fitted one of these and if so... Is it a difficult job? What do you need etc

I drove this last year when looking for my Cup, it belonged to @CuppyDean and had only done 57k. I don't know why I didn't buy it and I ended up with my sheddy Cup! Previous for sale thread http://www.cliosport.net/threads/rs2-172-cup-57k-%C2%A33400.730349/ Worth a look if you're on the...

Saw this attending a RWYB on Saturday at the York Raceway. I didn't see it race as I was racing too. I think it had a Northern Renault sticker in the rear window.

Not sure if this is the right section but on a receipt for my Clio it states the fuel filter was bypassed when they went to change it at last service. Anyone heard of this being done and will it effect the car in any way? Used to be turbo'd but now running a standard 2.0 172 engine I believe if...

Wondering if anyone has any recomendations on places to get a new key cut and programmed for an 03 cup. Thanks

Anyone on here? Unfortunately didn't get a chance to speak to either driver. Didn't see the inferno out on track either but the RB seemed rapid to say the least! :smile:

Morning folks, Went and bought my first Clio 172 Cup yesterday. It was for sale at a local garage as a trade in cheap. Autotrader valuation put it at £1400 nearly for age and miles, although the car does need some jobs done to make it "right". But for the money, I figured it was worth a punt...

My '03 172 Cup had a non-start issue this week after a few days not using it. The previous owner told me that if the stereo face was left on for a while the battery would go flat so he had put a new battery on before I took it away. I think it was just an old battery causing his issue but I'm...

I'm going to change the aux belt on my 172 cup ph2 soon, and just wondered if there's any special tools ill need? I'm removing the front bumper to replace the lights anyway, so planning to do it then. Is it pretty straight forward with there being no A/C ? I've looked for a guide but I can't...

...on the MK2s? One that can be a permanent fixture and doesn't look absolutely s**t too.

Picked her up n Monday... 2009 197 Cup in white, needed a car for daily duties with a 70 mile round trip commute and always fancied a 197. Cheers Steve

Right, I’ve decided to get a project thread going. I have already got some photos of the car so far in the Media part of the forum but I’m going to start this as its going to be an ongoing project. This is where the car stands at the moment: I brought the car just over a year ago with about 68k...

Hi guys looking for some advice , The car is 182 non cup Stock suspension , Looking to do few odd track days and trip to the ring, car isn't used daily , just weekend warrior , I'm on 16s, Can't decide on either all 4 shocks swapped to new 172 cup New top mounts and prima lowering springs as...

I'm going to have a go at refurbishing my 172 cup headlights today. If I don't get the result I want, I may buy some new ones as they're around £60 a pair on ebay from Renparts etc. But, are these actually any good compared to the genuine Renault ones I have at the moment or are they inferior...

I'm going to have a go at refurbishing my 172 cup headlights today. If I don't get the result I want, I may buy some new ones as they're around £60 a pair on ebay from Renparts. But, are these actually any good compared to the genuine Renault ones I have at the moment or are they inferior in...

just wondering how fast roughly would you reakon a supercharged one would be 0-60 i know every car may vary but a rough guess or anyone thats experienced one would be great, i fancy a little sleeper project seeing as these new amg mercs m135 bmw civic type r n new focus rs are on the way and...

My current place of work is in an industrial unit on a farm. One of the actual farmer types has seen fit to hide a chunk of a steel gate with a couple of vertical nubs on it in the long grass next to the access road, with the net upshot that when pulling over to let a truck past just now I lost...