ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Search results

  1. Raymond_11

    Window regulator part

    Will give them a call thanks
  2. Raymond_11

    Window regulator part

    Hi, my window has fallen off its runner but still goes down by hand then back up with the buttons. Think it's just the little plastic bit that holds it together does anybody have a part number or anything for it? Thanks
  3. Raymond_11

    Custom Number Plate Surround Order

    I would be interested
  4. Raymond_11

    Testing Injector plugs

    Set it to ohms and put it onto the plug on injector and I'm sure they should be like 16 ohms
  5. Raymond_11

    Missfire cylinder 1 P0201

    Also has P0314 fault code misfire cylinder unspecified.
  6. Raymond_11

    Missfire cylinder 1 P0201

    Injector loom looks fine but not tested it. Yeah cleared codes afterwards
  7. Raymond_11

    Missfire cylinder 1 P0201

    Yeah definetely the right way lol
  8. Raymond_11

    Missfire cylinder 1 P0201

    had put cylinder 2 injector into no.1 and no.1 in cylinder 2 and missfire still at no.1 ??
  9. Raymond_11

    Missfire cylinder 1 P0201

    My centre section exhaust rubber had snapped and exhaust was swinging about, then this missfire appeared then disappeared. Now it's back again, I have tried a coil pack also tried injectors and swapped injectors round. Also took cylinder 1 spark plug out cleaned and gapped it. I'm thinking...
  10. Raymond_11

    trophy port glasgow tesco

    Yeah didnt seem any difference in speed from the cars I've got a decat and panel filter
  11. Raymond_11

    trophy port glasgow tesco

    Aye that was me, their not Renault ones just oz f1's.
  12. Raymond_11

    trophy port glasgow tesco

    seen the cliosport.net sticker wondered if you were on the forum, car looked great!
  13. Raymond_11

    Anyone with clip

    Thanks will give them a call
  14. Raymond_11

    Anyone with clip

    I think the problem is that my car is the first of the ph2's. But everything else works and the n3 should be able to be altered to fix the window, does any body know for sure. Is swr or rentech on the forum ?
  15. Raymond_11

    Anyone with clip

    It works with my original uch-hg which is nackered but doesn't work with the n3 along with full beams so bought another and the full beams work but passenger window still doesn't work at all
  16. Raymond_11

    Anyone with clip

    Basically have a n3 uch in my early ph2 172 and passenger window doesn't work to see if it can be activated ?
  17. Raymond_11

    Odd creaking when pulling off and stopping

    I have the same and reckon it's my top mount
  18. Raymond_11

    CLIP

    With the old one the drivers window didn't work as there was bit broken but if u crossed it out it would work also it didn't read the key sometimes so was on its way out but everything else worked
  19. Raymond_11

    CLIP

    So you think the uch is at fault then @MicKPM
  20. Raymond_11

    CLIP

    Mines had a uch-hg went through a bit of a flood and water got into it and the drivers window wouldn't work bit blown u can see on uch. I bought a 2nd hand uch and Ecu and someone told me that it was uch which can be reprogrammed on clip to activate stuff
  21. Raymond_11

    CLIP

    I have put an n3 uch in my car and the passenger window or full beams don't work now can u do anything with that @rctempire Sorry to hijack Cheers
  22. Raymond_11

    The Knockhill Thread.

    That bmw was bloody quick looks to have had the 2.8 with the m50 manifold got to have been over 200bhp
  23. Raymond_11

    The Knockhill Thread.

    I know he was holding everybody up in the corners lol was awful twitchy
  24. Raymond_11

    The Knockhill Thread.

  25. Raymond_11

    The Knockhill Thread.

    I'm planning on doing the 22nd will be my 2nd track day. Looking forward to it
  26. Raymond_11

    Members in Scotland

    Raymond, greenock, black ph2 172
  27. Raymond_11

    Misfire, running on three cylinders now won't start

    Surely unplugging injector 4 and it made no difference could mean that it's the injector at fault ?
  28. Raymond_11

    Clio 172

    Full car here can't get it going if any ones looking for bits or the whole car 53 plate in black Think it's a wiring issue Service history and apparently remapped on a for sale ad I have with the history
  29. Raymond_11

    Clio 172 won't start

    The car was in a friends garage to get fixed and all he changed on it was the coil pack and tdc sensor. He checked the timing and said it was bang on. So I manage to get it because they don't know what's wrong with it. Fuel pump primes Coil pack tested Got compression Injectors are spraying...
  30. Raymond_11

    Clio 172 won't start

    Can anyone give me an idea what I should be checking/testing
Top