Search results

Hey guys When I went to Germany. I purchased some spare d2s bulbs for the standard 172 xenons. I have sold my clio now but still have the unused new bulbs. is anyone interested in a pair? These were 60 quid new.

Yes thanks I meant map sensor may have been the pad autocorrecting. Don't be a smart ass. How much is cheap for an injector?

Ok how much are injectors? Plus won't I have to depressurise the fuel system?

The first garage is a family friend and he his son is an ex renault technition, they havnt charged me for the work they did. I may do, whats the postcode of your garage?

Hey guys I've had this reoccurring problem with my clio. it stalls when rolling upto junctions, has an intermittent misfire, and once it stalls can be very hard to restart. I've had numerous bits replaced, no cure so far. (Cleaned crank sensor, rear lambda, temp sensor, plugs, ht leads) I've...

As to the rods Probably made in different years then the part was superseded to a new number for both? I had the same dilemma. RS Megane, focus st, astra vxr, but then I started looking at brand new cars instead, which lead me to different machinery. Hatches with similar power to the clio.

I couldn't get the lambda sensors to budge with the clearance I had to work under the car. but I unplugged the battery for 15 mins to reset the ecu. It seemed to have an effect on the starting, first flick of the key, however it doesn't always start after stalling now which it still does. Ok...

Yes I told my mechanic about the lambda sensors and he said, when they plugged it in it only said the rear one was faulty. but he wouldn't listen when I told him about the front one causing problems. i think I'm going to put it on the ramps my dad has, and swap the lambda sensors over tomorrow...

Ah ok, so the map sensor may be the cause for my problems. would it throw up a fault code? I have the regular issue people have been complaining about, but the seems to be no definitive fix. It stalls as its coasting upto junctions, stalls in neutral, in gear, clutch down or up. also I have...

Subscribed I'm having similar issues

Hey guys what sensors are these? Would they cause the car to stall if they are loose? Or shorting out? They are found on the left of the throttle body plenum on a 172. The black wiring housing that runs up the left side of the engine, that holds the wiring for these two sensors, could be...

Wow that's some good results out of a 1.2 lol

Ah yes I've driven one of those, very nice, torque monster. I got a new twin charged one with dsg. puts flame suit on lol

Hey guys, i noticed today when firing up the clio, either it stalled because it always does it, or because I was wiggling this big black cable. On the side of the engine, which once I took the cover off the top. is the wiring for these two sensors. It continued to stall when wiggling these...

Mk 1 or 2?

Well I pick the Fabia up on Friday. Thing is the clio only has 68,000 on the clock, I would effectively ruin it as a road car llol well as long as I don't strip it out I spose.

Hey guys As you may know from my other posts, my clio 172 ph2 has a nasty misfire, and is forever stalling and not starting on me. I can't rely on it everyday anymore to get me to work. So yesterday I bought myself a Fabia vRS to commute to work in. Now what should I do with my Clio? which I...

Did you sort this problem , mine is displaying similar symptoms.

I also have this problem, cutting out when rolling to a junction with the clutch down. Is it easy to swap lambda sensors yourself? I may have a go this weekend.

Bump please see post #9 i thought the car was fixed, but I got such a bad misfire the other day that the car cut out. whilst up to temp on a dual carriageway.

How can you test the injectors?

Hey guys. That sorted out most of the issues I've been having with the clio. However it is is stalling when rolling up to junctions. Also when the car was up to temp and cruising down a dual carriageway today, suddenly out of nowhere It had a terrible misfire, it got progressively worse, till I...

Ok I investigated the routing of the HT leads. What i found was the cables run to the far left of the throttle body top renaultsport bit, then all 4 went underneath on the left side. Im guessing this wasn't correct, because when I run my fingers along the back of this tb unit plenum. I noticed a...

Oh I've done the temp sensor too. My local garage has an ex Renault technician. i shall investigate.

How can I check the fuel pressure, is it something I can do from home, or is it a workshop job? im going to have a look for pinched ht leads today, cheers for that.

No warning lights, nothing coming up when plugged in either. Coil may have been replaced as my local garage has done the work. I did ask them to replace it. I wouldn't have thought a pinched HT lead would be an issue if its fine for normal driving but not uphill. Im thinking it might be a fuel...

Hey guys Ive had a problem with my clio for a month now. I thought it had a cold running issues, with severe kangerooing. (More than normal) Also stalling, when cold, and not starting on the first turn of the key. I have had the following things done. Cleaned Throttle body cleaned crankshaft...

Ive still got stalling, non starting, also a terrible misfire when cold. I rang my mechanic who replaced the CTS, cleaned the TB, put new HT leads and plugs in. Im thinking the crank sensor and a new coil... OR should I try something else. Also yesterday after it kept non starting then...

Cts? yes it does splutter when.cold. my mechanic has replaced the plugs and the temp sensor to correct it, and now I've got a misfire too. But the real test shall come tomorrow morning, to see if it has cured it.

Would this sensor cause the same trouble when the engine is cold? Mine is doing the opposite, all the above symptoms but when cold, yet fine when hot.