Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
So I’m still here but the inferno turbo went a month or 2 ago as I was offered a price I just couldn’t refuse for it.
Jump forward to now and if you’re on my instagram you would know I have been looking for a 330/335i LCI touring manual but trying to find one in spec and budget has proved near...
So I have a pair of grey insert Xenon that came with the car when I bought it.
From what I can see one adjuster is broken and the other is ok but it looks like I’m missing a couple other bits. Can anyone advise what bits are missing? I have the rubber covers and indicators holders.
So as noob as this sounds and the 4 RS clios I’ve owned this is the 1st to have coilovers…
I need to raise the rear and potentially the front up to allow the new PMS stub axle spacers to be fitted so I don’t scrub the tire.
I understand that I need to turn the ring counter clockwise to raise it...
Where is the best place to have a spray can mixed up? I’ve seen some on fleabay but I’d rather use something tried and tested by others as I’m wanting to do my cover.
As the title suggests I require information regarding the securing of the rear arch liner as mine decided it doesn’t which to be part of the car anymore.
I’ve had a stab around the rusty mound where it secures but I thought they were all done with plastic push fits. Any information would...
As title ... Can anyone advise if any known issues running 6j et30 15” wheel over a 7j on a 182? Seen a set for sale for cheap but never heard of a 6j on 182s
Cheers in advance.
So I appear to have blown all my engine oil through the breather over the block and gearbox. I was just wanting to know potential causes for this to do it as an idea to give my mechanic. I’ve topped the oil back up to see if the is an actual physical leak anywhere as I’ve had no drips on the...
I’m going to be doing an abs ring change out on the BG. Is it literally 30mm drive shaft nut off, 2x lower arm bolts, knock shaft out of hub, remove and refit abs ring and refit back together? Is there anything I should be mindful/careful of when doing it as it’s the 1st time in trying one.
Thanks
Just going to fit my stub axels spacer and hoping people could just confirm as it’s been about 3 years since I last did this...
Undo 2x Caliper bolts an move out of way...
Undo hub nut nyloc and remove disc giving access to 4x t50 torx heads...
Finally undo the nuts whilst holding the t50s not...
I’m looking for any previous owners of a BG 182, reg BG55 NKX. The car has 2 white cliosport.net internal stickers on each of the rear windows.
Any information would be appreciated 👍🏻
I mean really what is going on with the 1*2 prices!!
I recently missed out on buying my turbo 172 back cheap because I hesitated and the past week I’ve missed out on 2 Artic blues, an inferno and 2 silver 182s all for around 2-3k mark.
I appreciate the fact that manufactures don’t make cars...
For those that don’t know me I had a boosted Monaco for 3 or so years which I built into a fast road setup with a few choice mods.
I’m currently getting from a to b in a BMW M140i Shadow edition...
Fully stock 350ish bhp and 370 ft lbs, BMW were very loose with the figures as many stock ones...
Time to sort out the take over of Great Yarmouth sea front on a Sunday night with French cars!!
Plan to meet at Tesco Great Yarmouth from 16:30 then head to the front around 17:30.
Be good to get some new faces to our meets aswell as the regulars.
Myself and @182_steve were out last night at the local Sunday meet, when a couple other mates turned we went and took some pics...
I will be organising a proper east of England meet for August...
Today I put together a last minute meet for the East of England members. Weather held for the majority of time whilst driving up the country coast road until we ended back up Great Yarmouth seafront.
Thanks to @182_steve @rsdan @Rystar @Harley-xi and @massivewangers for turning out. I’ll sort...
Let’s get some Clios together, talk cars, take some pics before heading to GY seafront.
Bessemer way,
Harfreys industrial est
Great Yarmouth
NR31 0LX
16:00
As title suggests when accelerating hard and lift off throttle I now have a lot of vibration through the car. It’s not any heat shields as it is too loud to be that I suspect it could be the engine on the subframe??
I run Powerflex upper engine mount and lower dog bone but it has been fine up...
Mornings all...
I recently had a new 110 alternator fitted as mine let but since I run turbo ac in my car is completely irrelevant. It’s fully charged but doesn’t blow that cold I assume this is do to the turbo near pipes etc
If I run a cup set up/pms delete kit would I be able to retain my new...
Since having my car setup with camber and toe my wheels look a little lost in the front arches. The oz currently on the car are 7j et37. I have tried running 16mm hubcentric all round but the rears scrubbed on 195/45 tires.
I was thinking of swapping to pms stud conversion to run a 10mm spacer...
Meet up in GY on the front, drive the coast road up to north Norfolk Cromer or further. Stop for pics/chats/food. There is a cafe on the cliffs at Cromer with a big grassed car park.
@182_steve @Harley-xi @Adamxx @massivewangers
I will be sorting a meet/drive whilst away, probably meet in GY then coast road to north Norfolk Cromer way. Tags others and keep eye out on the fb pages.
I recently bought a set of mounts which came with the strut bar... I’ve not fitted as yet due to time but every time I look at i think it’s wrong because it’s got 3 bends in it.
In the 2nd image the 2 drill bits denote the “normal” bends I would expect to see and the punch the extra...
Ive seen a set of wheels I like which are very different to the norm but the offset is 25, is this too much for clios as I seen the ideal is 35.
Much thanks for any help...
Thanks all that braved the weather this morning to meet in Norwich. Luckily it held off for the duration of the meet and it was nice to meet some other local owners. Hopefully I’ll be able to sort more meets when the weather is better but for now enjoy the few of pics that I took.
A few pics of my highly neglected turbo, having been working away so much recently I’ve not done anything with it. Before I went away it was minging filthy so this morning I decided in the 1 degree temps it would be a good idea to give it a bath...
Current spec -
Order of mods...
How hard is it to fit? I’ve searched for a guide but can’t seem to find one and the instructions seem a little vague specifically to a clio.
Any hints an tips would be appreciated.