Search results

I run Corbeau Clubsport seats with runners and X-Low subframes the problem I've got is I want to ditch the runners, for two reasons really one being I don't have any adjustment due to the seat catching on the door bar and secondly there piss poor making the seat move around. So the obvious...

Halfords have 20% off all their torque wrenches. Just ordered one myself

Basically I want to know how important heat shields are? I've already scrapped a couple due to removing HPAS and chucked the one that has a hole for the gear linkage due to rust. Now a couple at the rear are loose and I'm thinking of just getting rid. Is it worth sourcing new ones or even...

Noticed my side lights/dash/rear lights come on automatically when I turn the key to position 1, first thought was to deactivate auto lights but this doesn't work. Tried it after one beep and two with no luck. My cars fully stripped and the light/rain sensor as been removed. Any ideas on how...

Need to make up a pipe to loop my steering rack. Looking at this kit on eBay as I'd rather buy something to do it myself. Just wondering has anyone got any experience of using a kit like this? Thanks

I've just bought the brackets for a Clio 172 cup alternator setup which includes the top bracket, bottom bracket and tensioner bolt. Can I use the bolts that my current setup uses or will I need cup ones? If so can some help me out with part numbers can't seem to find anything on here or...

Looking for somewhere local to get my track car aligned and cornered weighted. I know Revolution is local but from past experiences I would rather go somewhere else. Needs to be Newcastle area. Thanks

Got an email through saying when you buy three sets you get an addional £20 off your trade discount. I got sets of 1/4, 3/8, and 1/2 for £80. I know their box tool kits include quite a lot but these include more in each range and I'm not fussed about having imperial sockets.

Just picked myself up one of these https://www.toolstation.com/shop/p50505?table=no very cheap considering most places are still selling at the £100 mark. My mate has one and it's perfect for most jobs, rated up to 130Nm so good enough for removing wheels. Picked up a M12/18 charger and battery...

Deleted my carbon canister today but unsure what people fit on the inlet side? I read on here I need a 12mm silicon cap which I ordered but there's nowhere to put it I'm guessing 172's are different to 182's. I'm thinking I could just remove the metal barb bit out the hose and blank it with a bolt?

If I was too change my hubs from 54mm spacing to 60mm would I need to change anything else? The only reason behind this is to suit a set of coilovers which have came up for sale and a mate of mine has some 60mm hubs. Thanks

I'm in the process of making a switch panel for my track car, the only switch I'm wanting to keep is the hazard switch. I went to Halfords and bought a 17amp rocker switch and set about wiring it, from looking at wiring diagrams I believe the orange cable is the supply, pink the load and black...

I want to get my loom cut down as I've stripped out most the comforts the car came with, I'm a bit of a fanny when it comes to stuff like this and even though taping it out the way is a cheaper option I still want it done. Does anyone know where or anyone who can do this? I have no problems...

This build started back in April 2016, a few of my mates got into buying and selling cliosports, I had just sold my last build and got talked into buying a Monaco blue from my mate. When I first seen the car I knew I wanted it, it seemed all straight and well maintained, that was until I seen...

I'm going to be fitting a FIA cut off switch in the next few days, I'll be using the yellow cable to the igniniton switch as it's a 4 post switch. I'm just wondering what size cable to use from the ignition switch as it seems quite big 4mm outside diameter to be exact which would indicate its...

I've been looking at moving my battery into the spare wheel well in my 172 mainly to free up some space in the engine bay. I think I've got a good idea on how to set it up using threads on here and other forums I just want to confirm this before going ahead and buying everything I need. So...

Seen you in the cooling off carpark.

Seen yous parked up at centre parcs

Well its been a while since I posted pictures of my car and tbh my last thread went by un-noticed. Over the past months av been on the snoop for some new rims and I finally made the decision on which ones to go for (Keskins KT-1's) I started off looking for a set of Borbet A's but months were...

I need to know offset of my standard wheels but am unable to take my wheel off due to the lack of a jack. The cars a MK3 dynamique with 5 spoke alloys anyone know the offset? Thanks

Looking to get a set of coilovers for my MK3 and the two above are the only ones in my price range. From what I gather FK coilovers go lower which is edging me in there direction but I don't want spend £500 just on tht. So what do you think? Anyone know what the build quality is like in...

A was painting some parts too day and it seems av put too much laquer in one area. You can feel the difference and see it in the sunlight. Is there anyway to solve this? Cheers

am stuck in a little situtation, av got a MK3 Clio and its currently lowered 45mm on standard alloys with 30mm spacers on the rear. Av got £550 to spend on ethier Coilovers or Alloys. Which one would you go for first?

I need some Borbets A's in my life! Anyone got any pictures of a Mk3 with them (highly doubt it) or Mk2 I also need to justify spending £900 on a set of rims and tyres!

This might be in the wrong section but as nothing is confirmed i thought it would be better off posting in here as am just gatherimg interest. I noticed there hasnt been any updates on the Dubmeister pressed plates group buy in the group buy section, so i thought i would get in touch with...

Reg 60KTJ

Juet wondering roughly how many there are as i dont see many posts about them. So show me your mk3!

Need some help finding some brake pads for my car av looked around and cant seem to find any for my car. My cars a Mk3 so 2005- 1.4 and am after a set of front brake pads. Any help will be great thanks.

Whilest detailing my car today i noticied my front bumper and bonnet were in bad shape. Lots of stone chipings and marks in the clear coat. I was wondering how much it would cost to get them resprayed? Just looking for a rough price. Cheers would perfur prices from experience.

My cars just started squeaking really bad on the front right side. Its really loud, i have noticed it goes away when breaking. It also went away for half and hour after i drove at high speeds. Any ideas? am thinking brake pads or wheel bearing. Cheers