Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Hey guys,
Looking for some help with an oil leak.
Yesterday I took the engine cover off to find that oil has leaked from somewhere, I'm not sure where but there was quite a lot of oil around the breather and down the back of the block.
Had a look underneath and couldn't really see where it was...
Hi guys,
The other half's car has stated making a creaking/knock on the offside when going over large speed bumps.
I have made a video to see if anyone thinks they can identify the problem
http://www.youtube.com/watch?v=EozHtLo20nw
Thanks in advance.
Looking at it again today it doesn't happen with not in gear.
Hopefully it's not the gearbox on its way out.
It doesn't have any problems selecting gears or anything....
So the rattling has stopped it was the top engine mount.
When I looked at it it had obviously moved.
Still have a strange noise when at about 5.5k and on I tried to get another audio clip so here it goes
It starts at 19 seconds
https://dl.dropboxusercontent.com/u/9524489/Car%202.m4a
Hi guys,
I am having a problem where when accellerating hard when it hits about 4K the noise starts.
if you accelerate gently it makes no noise.
It sounds like something is loose but I can't see anything have had a bit of a look but don't really know where to start.
I have made an audio clip...
Hey guys,
The missus has just purchased a mk3 clio and it has a odd problem with the interior light.
First off it doesn't come on at all when any of the doors are open and the controls have a mind of there own.
I have recorded two videos if anyone has any input that would be great.
Yeah I have it out now I had to get it out of the mount and smack it with a hammer.
Is that engine mount dealer only or can I get one from the motor factors?
Did really get a chance to look at this the other day so back on it today.
It's a 13mm bolt and the thread length is 85mm
Dan was it those bolts that you meant go from front to back?
I'm guessing there should be a bolt in that hole.
How do I go about getting it back In there if that is...
I am having a nightmare with this.
When the drive shaft is in at the gearbox end I cannot get it to go all the way into the hub.
Does anyone have some tips for this it would be hugely appreciated.
So whilst changing my drive shaft I found this bolt sitting in the under tray
I was told that it's for the alt/inlet manifold but it looks like it is already there.
If that is not the correct place to be looking could someone please give me so advice.
I am slightly worried about...