Search results

Im no electrician so dont have a clue on the implicatioms of putting them in wrong. Do unknow what they are for? Sent from my SM-G920F using Tapatalk

Meant red and black. They are both at the bottom in the pic, black is hard to see. Ive seated them for the purpose of the pic but dont know which way round is correct! Sent from my SM-G920F using Tapatalk

Please elaborate good sir. I do realise i will not have a horn until i source another stalk. The ph1 stalk however is constantly legt indicating - i believe i have broken it Sent from my SM-G920F using Tapatalk

Whasssuuup, Anyone know which way round these two wires go (red and white) and what they actually do? Refitting temporarily as the phase 1 wiper kept catching and was annoying me! Sent from my SM-G920F using Tapatalk

Its called Harrys Lap Timer mate, ace little app i have on my android not sure if its on ios. Check it out, its a really good app Sent from my SM-G920F using Tapatalk

Yep! Was queuing to go onto the sighting laps and he lent on the accelerator - he was disabled so had some kind of hand throttle.. The guy has since gave me some money (which he didnt have to do) and the damage isnt too bad, will need new rear bumper which ive sourced already but needs...

Was good thanks. There were cars going off all over the place though... Heres a vid, i was holding back quite a bit as the tyres were losing grip and someone had already gone into the back of me in the pit lane so i didnt want to do anymore damage! Sent from my SM-G920F using Tapatalk

Let us know on here as im interested as well! Sent from my SM-G920F using Tapatalk

Ferderal RSRs - 15 inch Sent from my SM-G920F using Tapatalk

Howdy, Im at Brands this evening and it seems that its going to be a bit moist. Any advice for driving in the wet, all my previous track days have been bone dry. I assume just brake earlier, less throttle out corner etc. What about tyre pressures? What pressure do people start at and what...

Pretty sure it was rubber side down. So are you 100% sure its metal side down? If so i will painstakinly swap it back round. Ta

Yes it does. It was placed over the spindle first and then the rest of the mount fits over the top. Just worried that there may be premature wear to the mount if its the wrong way round. But im reluctant to take it apart until i get a concrete answer... hopefully it doesnt matter and i can...

Cant see from your pic. In my picture the metal washer with the three little grooves, does it matter if this is metal side down or metal side up? Think i fitted it like this

Sorry to take over this thread. Quick question whilst on topic; i fitted my mount the other day. When i received the item it had a cable tie through the middle i assume to keep the parts in the correct order. I took this out and forgot which way round to put the attached washer.doh One side is...

Hi all, Didnt want to create a thread but cant seem to get an answer elsewhere. Bought this a while ago and foolishly removed the cable tie that held the pieces together. Can someone please confirm if this is the correct order and that the washers are the correct way round.

Why the trailer? What is not road legal about the car? Or is this due to tax/insurance purposes?

Looks good. You got links handsome?

Ahhh not worth the effort for about a kg then lol

Wicked, cheers. Assume the bottom dash needs to be removed to access the sound deadening?

Dudes and dudettes, I've ordered a flocked dash for my road/ track car as I think they look so pwetty. I will therefore be removing the top dash. I've found the guide and it looks nice and easy. Question; what is behind the dash that I could remove to save weight whilst still maintaining...

Much better [emoji3]

Legend. I was about to buy 3 inch [emoji30]

Anybody? No? DUST! Please answer me this at least. Is the bore size of the mid section 2.5 or 3 inch? Thanks muchly

Hi dudes, Im thinking of having the center piece cut and something like this exhaust sleeve clamped in. Question; do you think that this would put any restriction on the exhaust?

If thats including VAT then i stand corrected. Couldnt find the 60mm fit tho.....

Not sure it works out much cheaper than ktec after adding VAT.....

Looking to order these soon. Annnyyyoonnneee?

Keep hearing people mention about getting then imported. Anyone know where from?

Dudddessss, im planning to fit the gearbox mount over the weekend (weather dependant). What tools will i need to get cracking? Middle spindle nut looks like i might need a deep 18mm socket?

Correct size?