Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
All the pipe/lines are in the passenger wheel arch if you strip the wheel arch liner out, then if you can't solve it, continue and remove the bumper.
I changed both of mine about a month ago took me an hour start - finish.
All the pipe/lines are in the passenger wheel arch if you strip the wheel arch liner out, then if you can't solve it, continue and remove the bumper.
I changed both of mine about a month ago took me an hour start - finish.
just kill the water and go over it several times and let the VAX suck the water back out, then leave the seat in the house for 48 hours to thoroughly dry out. I've never done my front seats. just the matts rear bench and carpet.
When i did the carpets i just ran the car with foot heat on full...
You possibly have a channel clash with a neighbour, download netstumbler to see what channels your neighbours are using then move yours as far away as possible.
Or make it select the least congested channel automatically.
http://www.netstumbler.com/downloads/
Vax V-020 is a popular model and would fit that tool according to the seller.
http://shop.ebay.co.uk/items/_W0QQ_nkwZVaxQ20VQ2d020QQ_armrsZ1QQ_fromZQQ_mdoZ
I have no idea what they're like for dry vac'ing as i only use it for washing.
You need to make sure the VAX you buy has the upholstery tool which i think is only available with the pet models, but i'm no expert.
People on DW seem to rate graded electricals on ebay selling 'seconds' do a serach over there there's loads of info.
This is the one i bought...
Or go with the standard for now and get a sample of the PH to compare it with from here.
http://www.detailingworld.co.uk/forum/showthread.php?t=80726
Hth
Marc.
Shows as in stock http://www.cleanyourcar.co.uk/washing-and-drying/valet-pro-ph-neutral-snow-foam/prod_500.html
Call Tim and ask him to change it, or wait for it. The standard stuff is ok but this is slightly better, remember you're not aiming for a shaving foam thickness, it's supposed to run...
I Wet and dry Vax'd my Alcantara with Autosmart Bio Brisk, after my GF had the good sense to put shopping bags on the back seats with milk in, which obviously was going to leak.
now all is well. I used distilled water to help prevent tide lines.
Tbh i would expect a pro to have snowfoam considering i have it myself, next you'll tell us you don't have a PTG!
I also think you need to appear highly professional, the market you're entering is very competative and has many established detailers.
You must have insurance if you're machining...
I went for the same
-Braided Lines
-Brembo HCs
-DS2500
-5.1 fluid/ urm maybe Dot4?
When i did it i used DOT 4, car says Dot 4 only and my friend whose a mechnic at Vauxhall for 15years told me 5.1 is not safe in a road car, something about it's inability to absorb even a tiny bit of water, i'm...
paddy it'll be around £200 for the Aux belt, but a cam belt on these cost around £500-£700 and are a specialist like rentech or ktec or good main dealer only job, as said above they're a little tricky.
welcome btw
I replaced my headlight washers a few days ago and it went like this:
- 2x screws in slam panel
- remove bonnet sensor in slam panel
- 2x torx screws in front splitter each side
- 1x torx screw in each wheel arch
- then remove inner arches
- 1x 10mm bolts inside wheel arch (each side)
- 1x clip...
All the things you describe are completly normal in a cold 182.
They're all lumpy at tick over, irrespective of engine temp. When cold they run like you explained above for about 3-5 mins.
it's the character ;p
Hth
Marc.
You know when you press the windscreen button, to clear the front screen?
Is there a way to make it blow on the front screen and for e.g. your feet at the same time?
Also can you use the windscreen button without AC engaged? I've tried a few things but it won't play nice!
Anyone?
Thanks
Marc.