ClioSport.net

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Search results

  1. nathanc29

    Help I’m an idiot sounds like diesel

    From Faversham Kent still deciding what I’m going to do to be honest Sent from my iPhone using Tapatalk
  2. nathanc29

    Help I’m an idiot sounds like diesel

    Yeah I had driven it I had just put all the bumper, plastic trim headlamps etc must have fallen off something. I’m on a gravel drive and it gets everywhere must have fallen off something I had picked up, if you look in pic you can just see where it came through the belt Sent from my iPhone...
  3. nathanc29

    Help I’m an idiot sounds like diesel

    I used the proper Renault timing tools, I did the timing with the engine out to the Renault workshop manual and in the manual it’s says put tipex on turn it over make sure they are in the same place. The only reason the timing jumped is a stone was embedded in the belt. Sent from my iPhone...
  4. nathanc29

    Help I’m an idiot sounds like diesel

    I done leak down test and as air was rushing out the inlet manifold with no cams in I would have a guess they are bent. Now what to do, engine, head or bin the lot! Sent from my iPhone using Tapatalk
  5. nathanc29

    Help I’m an idiot sounds like diesel

    I was wondering if I could do a leak test here’s a picture of how far out it was, what do you think? Sent from my iPhone using Tapatalk
  6. nathanc29

    Help I’m an idiot sounds like diesel

    Yes cut the belt off as it had hole in it. being lent a compression tester tomorrow I assume as valves are all sitting up now should be quite simple ? Sent from my iPhone using Tapatalk
  7. nathanc29

    Help I’m an idiot sounds like diesel

    Yeah I was just checking before I ripped it all apart put the crankshaft pin in the stone must have made it jump teeth until it stopped gutted Sent from my iPhone using Tapatalk
  8. nathanc29

    Help I’m an idiot sounds like diesel

    Checked tipex marks out by three teeth, looked round belt and found stone embedded in belt! Took rocker cover off all the valves sittinglevel and they all push down and spring up so think I might have been lucky! Sent from my iPhone using Tapatalk
  9. nathanc29

    Help I’m an idiot sounds like diesel

    Ok cheers il have a go tomorrow weather permitting cheers! Sent from my iPhone using Tapatalk
  10. nathanc29

    Help I’m an idiot sounds like diesel

    I had a thought it would be timing related took the cover off and belt was still tight, I have drove it you would have thought it would have moved then not when I was starting it up? Sent from my iPhone using Tapatalk
  11. nathanc29

    Help I’m an idiot sounds like diesel

    Long story, finish putting Clio back together after probably 3-4 years I’ve had engine/gearbox out, cambelt and dephaser water pump . Gearbox selector seal, clutch, bushes plus a few mods along the way ! Removed air con etc. It started fine and sounded sweet as, put all the plastics...
  12. nathanc29

    What is this!!!!

    Cheers bud Sent from my iPhone using Tapatalk
  13. nathanc29

    What is this!!!!

    Got this left over Anyone know where it goes on a clio 172 took it apart along time ago pics would be usefull to cheers!! Sent from my iPhone using Tapatalk
  14. nathanc29

    Clio 172 Engine n gearbox overhaul

    How many engine failures have been because of crank pulley failure, if it’s vulcanised rubber even with cracks it sticks like s**t to a blanket! Sent from my iPhone using Tapatalk
  15. nathanc29

    Missing part from fuel rail

    Yep you were right after searching and ordering a regulator looked down the end and it’s blank! Cheers for your help Sent from my iPhone using Tapatalk
  16. nathanc29

    Anyone recognise these bolts!

    Cheers for that, we need more pics of bits with there bolts very useful! Sent from my iPhone using Tapatalk
  17. nathanc29

    Missing part from fuel rail

    Could be phase 1 engine as it was changed at some point Sent from my iPhone using Tapatalk
  18. nathanc29

    Anyone recognise these bolts!

    13mm Sent from my iPhone using Tapatalk
  19. nathanc29

    Missing part from fuel rail

    Hi slowly pricing bits back together and cannot find this part has anyone got the part number as Renault wasn’t very helpful Sent from my iPhone using Tapatalk
  20. nathanc29

    Anyone recognise these bolts!

    I’ve got three and they are shouldered any one recognise them Sent from my iPhone using Tapatalk
  21. nathanc29

    Is this cable an earth?

    Thanks everyone Sent from my iPhone using Tapatalk
  22. nathanc29

    Is this cable an earth?

    Putting engine back in and got a wire that I think is an earth but just want to check it’s got black sheath if that helps Sent from my iPhone using Tapatalk
  23. nathanc29

    Cup alternator

    The number didn't match with anything on refurb kit ..... but it does with the non cup alternator when I compared alternators obviously the size is diffrent but the com brushes regulator etc look the same so ordered kit anyway to give it go worse part was cutting diode pack from the tails of the...
  24. nathanc29

    Cup alternator

    Thanks! Sent from my iPhone using Tapatalk
  25. nathanc29

    Cup alternator

    Or if someone can just take a picture of the label on one Sent from my iPhone using Tapatalk
  26. nathanc29

    Cup alternator

    Bought a cup alternator off here and the comm is fucked and the brushes. It's a Valeo but the sticker has come off found this kit on eBay can anyone tell me if this will fit? https://www.ebay.co.uk/i/222487253483 Cheers Sent from my iPhone using Tapatalk
  27. nathanc29

    Clio 172 idler

    Ok the supplier found it must have dropped out the box thanks for the help Sent from my iPhone using Tapatalk
  28. nathanc29

    Clio 172 idler

    It came in a box but it was open, whys that Sent from my iPhone using Tapatalk
  29. nathanc29

    Clio 172 idler

    A friend who got it through there work and it can't go back did consider making spacer and using normal bolt but thought I would try on here for the bolt Sent from my iPhone using Tapatalk
  30. nathanc29

    Clio 172 idler

    Sent from my iPhone using Tapatalk

Top