Ph1 'Exclusive' Budget Track Car

bloke · Aug 17, 2017

vroomtshh said:
Finally got round to finishing my single wiper. Take note - way more effort than it's worth 😂

wait until you have to shorten the passengers side to keep it working on twin wiper set up!!

vroomtshh · Aug 17, 2017

You've lost me. I don't have a passenger side wiper anymore

Fraser.J. · Aug 17, 2017

vroomtshh said:
Easy job to someone with your ability :wink:

Why do it myself when I could have the master(bater) himself do it for me [emoji8][emoji8]

Djw John · Aug 25, 2017

Good to meet you last Garry, shame we never met out on track, how did it go?

vroomtshh · Aug 25, 2017

Djw John said:
Good to meet you last Garry, shame we never met out on track, how did it go?

Yeh I was kind of hoping to see a few more of the Clios out on track. Went pretty well. Stopped about 7.40 as it was making an odd noise and it was chucking down but other than that was good. According to my lap timing I managed a 36s lap:tearsofjoy:

Djw John · Aug 25, 2017

That's why I didn't see you then, just a green blur going past twice a lap.

Aye it got pretty slippy, stayed out until the flag but wasn't going fast at all by then.

scotiamr2t · Aug 25, 2017

I kept missing you out on track, i came across a few clios but none were up for a play

Djw John · Aug 25, 2017

What one was yours? I played with anyone I could find! Stayed out way too long a couple of times as a result

vroomtshh · Aug 25, 2017

scotiamr2t said:
I kept missing you out on track, i came across a few clios but none were up for a play

Most folk didn't seem to want to play. And every time I seen someone who Did, either I was coming in or they were. Did you break yours? I seen you under it at one point

Djw John said:
What one was yours? I played with anyone I could find! Stayed out way too long a couple of times as a result

Scott has a really clean silver ph1

scotiamr2t · Aug 25, 2017

@Djw John as garry said above i have a silver ph1, had no plates on and full silver cage.

Yeah the gearbox was making a loud clunk when down changing into the hairpin so came in to have a look. gearbox oil all over the place so new box time. Has been whining all year so its been coming

Djw John · Aug 25, 2017

Ah yeah, aye don't think I saw you at all on track

Mine was doing the same but got away with it, maybe not next time!

vroomtshh · Feb 14, 2018

It's been quiet in here for a while. TBH, I haven;t even looked at the car all winter. So thought I should get it a wee treat in time for this years track days.
Now that it's here, I'm not sure wether to fit it or hang it on the wall in the living room :hearteyes:

Djw John · Feb 14, 2018

Nice!!

Rubicon_ · Feb 14, 2018

First time seeing this thread, good work!!

Hopefully see it soon at KH.

vroomtshh · Feb 14, 2018

Arran_ said:
First time seeing this thread, good work!!

Hopefully see it soon at KH.

25th March I think I'm next out

william... · Feb 15, 2018

Best Color for me!

Realy nice Mods! With this color its just too good to race at the track. But! Whaht shall we do. Its a race car

vroomtshh · Feb 15, 2018

william... said:
Best Color for me!

Realy nice Mods! With this color its just too good to race at the track. But! Whaht shall we do. Its a race car :smiley:

The colour has really grown on me. It's a bit different to blue or silver 😂

vroomtshh · Feb 19, 2018

And it's on

Chambers_RS · Feb 21, 2018

Have you changed the throttle linkage attached to the bodies?

vroomtshh · Feb 21, 2018

Chambers_RS said:
Have you changed the throttle linkage attached to the bodies?

Yes. I fitted the jenvey linkage kit. It's not cheap but IMO it' required. Otherwise it sticks open a lot and is very difficult to be linear with

vroomtshh · Feb 21, 2018

It also makes the cable route a lot nicer

Chambers_RS · Feb 21, 2018

Don’t suppose you get the part number for that kit do you?

I still need a TPS sensor too

vroomtshh · Feb 22, 2018

https://store.jenvey.co.uk/throttle-bodies-and-components/linkages/linkage-kit-single-cls1

You also need a different throttle quadrant. Nick supplied it for me. I got my TPS from him too

Djw Dave · Feb 22, 2018

Just spotted your thread, fantastic build, looks excellent.

Looking forward to seeing it out on track.

vroomtshh · Mar 13, 2018

Things have been pretty quiet lately. Got a few small updates to come shortly. But here's some fresh engine pics and my new carbon foot plate from the group buy

vroomtshh · Apr 26, 2018

Finished off tidying my engine wiring loom. 2.4kg saved from the original

Ant1 · Apr 26, 2018

That's a impressive saving!

vroomtshh · Apr 26, 2018

Ant1 said:
That's a impressive saving!

Not bad for free

vroomtshh · Jul 3, 2018

Couple of new titanium bolts for the rear shocks. Ever so slowly getting through changing them all

vroomtshh · Jul 6, 2018

Few little deliveries this week.

Big thanks to the TiStore for these titanium wheel studs. Give them a shout for any custom titanium parts

And a massive thanks to Max at M.S. engineering for sorting out my cam cover. Can get cracked on with fitting my new head now ?

barnesautos · Jul 6, 2018

vroomtshh said:
Few little deliveries this week.

Big thanks to the TiStore for these titanium wheel studs. Give them a shout for any custom titanium partsView attachment 1373795
And a massive thanks to Max at M.S. engineering for sorting out my cam cover. Can get cracked on with fitting my new head now [emoji847]View attachment 1373796 View attachment 1373797

That cover looks very nice Gary [emoji1303]

green · Jul 6, 2018

Actually love this exclusive ?? by any chance have you also gone to pure motorsport for the head?
I’m wanting to get a new head as I’m due belts..I just have a standard head and cams. Just interested in what you have gone for?
Cheers

vroomtshh · Jul 6, 2018

green said:
Actually love this exclusive ?? by any chance have you also gone to pure motorsport for the head?
I’m wanting to get a new head as I’m due belts..I just have a standard head and cams. Just interested in what you have gone for?
Cheers

As much as I'd love a PMS cmc head, I just can't justify that cost. It's a hand ported head with Supertech valves and a pair of Engine dynamics cams. It's previously done 235bhp, and I've had it rebuilt so hopefully will be able to manage similar

vroomtshh · Sep 22, 2018

I've been wanting to buy a new harness for a while but the one I had was perfectly good. Having bought a Hans device earlier this year, it seemed to make sense to buy a Hans harness now

Also got myself a Summit technologies raptor for the steering wheel. This lets me wirelessly control everything in the interior. This is all part of my interior wiring reduction which is about to come up very soon ?

Chambers_RS · Sep 22, 2018

Wirelessly sounds perfect ?

vroomtshh · Sep 22, 2018

Chambers_RS said:
Wirelessly sounds perfect ?

The less Renault wiring I have left, the better ?

vroomtshh · Oct 9, 2018

What could be going on here ?

Christopher · Oct 9, 2018

"Budget track car"

Page 3 and I see titanium bolts. ? I love it! That manifold is a work of art!

Djw John · Oct 9, 2018

Whats happening here is terrible financial decisions.

Keep it up.

Djw Dave · Oct 9, 2018

Was a good car while it lasted, shame the rust got her. RIP W66 ?

Ph1 'Exclusive' Budget Track Car

Scotland - South

Scotland - South

Scotland - South

Scotland - South

Scotland - South

Attachments

Brembo! Brembo! Brembo!

Scotland - South

Similar threads