Recent content by BRT Motorsport

We have fittings we can crimp on to braided hose https://www.brtmotorsport.co.uk/collections/braided-brake-hose-brake-fittings/products/m12x1-male-swivel-nut

Smaller port M10x1 Larger port M12x1

Hi veomuk, ebay or breakers is your best bet

http://rover.ebay.com/rover/1/710-53481-19255-0/1?icep_ff3=2&pub=5575378759&campid=5338273189&customid=&icep_item=254598651731&ipn=psmain&icep_vectorid=229508&kwid=902099&mtid=824&kw=lg&toolid=11111

we could do single lines doing away with small Flexi for £60 delivered https://www.facebook.com/brtmotorsportltd

We can make any length you require https://www.brtmotorsport.co.uk/products/braided-brake-hose-1

https://www.brtmotorsport.co.uk/collections/brake-fittings

https://www.brtmotorsport.co.uk/collections/brake-fittings/products/m7x1-bleed-nipple

i use team dynamics and they are ok, i have some random after market alloy and they dont fit

standard drive flange with m14 tapped holes, drive spline machined bigger to take 197 cv joints

yes as abouve, tap the hubs to take M14 studs,changed to m14 after shearing m12 studs,changed to m14 years ago and never had any issues need to make sure tap is straight

Could go up to M14

Yes ive got it going through a seald hole in the standard vent hole, to go through to top standard screen vents, and blocked off all other openings, i keep it running on stage if its wet or 1st thing on a cold morning and keeps clear, but if it gets missed up mid stage does take a bit of time to...

Not sure how good heated screens are these days but in the past not had them last long, in the rain if you keep T7 heater running when your competeing good enough to keep screen clear, not ran it to the vents, screen only

https://www.brtmotorsport.co.uk/collections/steering