Search results

Carlv8415 mark123 Thanks! You guys rock.

I will find out.

Oops can someone move this to Engine, Gearbox, Exhausts & Running Gear ?

I am having a gripper diff fitted and getting the box put back together. I have .60mm end float on 4th gear, while 1st- 3rd are .20mm Anyone know what the end float should be on 4th? And are shims available? Thanks in advance!

When I bought my ASTs the main man there recommended 400lbs front and 650Lbs!! rear for use with track day tyres. I thought he must be from crazy town so I tried 500lb rears. Sure enough the back felt soft. So I am putting in some 650lb rears. Hopefully I will get to try them this weekend. I...

PM sent.

Thanks RS I will wait for your email.

The link doesn't work so here are the lap times Levee Food Co 2014 Tasmanian Club Day Championship - Heat 3 Baskerville Raceway - Tasmania Super Sprint 2 Qualifying Q02 Page 1 Issue 1 Start Sun Apr 27...

So I took the car out for a shakedown http://racing.natsoft.com.au/635776308/object_859464.86Z/View?2 and it was awful! The brakes were crap and the rear end too soft. The turn in on tight corners was horrible. The gearing was also bad, for the tight stuff 2nd too low and third too high and on...

Thanks, I was thinking 421 or schrick but I cant find anyone selling them online. Anyone on here selling them or can give me a link?

Who should I go to for some advice and ordering cams? I am thinking 421s but I am unsure if I should go with verniers? I am running AT Throttle bodies and a Haltech ecu. I sent a message to Rstuning and they didn't get back to me and ktec are on my sh*tlist.

AT power itbs, they fit fine with the slam panel in place.

Thanks guys! F.U ktec

Anyone know what willwood calipers ktec use? Ktec are treating it like a national secret and I want to buy pads locally rather than paying for international shipping. Those ktec knobs wont see any more of my hard earned!

PM sent. Thanks

I need a Laguna 33/37 5th gear part nos 8200608035 and 8200611295 shipped to Australia. Anyone know who, where, what, how?

Started out as a standard 172 with 90k KMs on the clock. Fabricated CAMS approved roll cage AT Power throttle bodies PMS AC delete PMS Shifter Haltech ECU and dash AST IIs Wilwood 4 pots Fabricated rad and catch tank 170 atw It is road registered and I plan to drive to the circuit and race...

Ahhhh so it's one of those. I can get one of those bad boys, no problem. Thanks Guys I will be posting pics and specs of my race car in a few days.

No luck at the model shop. My local Renault dealer tells me they cant find the part without a phase 1 vin number. Any chance someone can PM me a phase 1 VIN?

And I got a phase 1 throttle cable but it didn't come with a nut to secure it at the body end, if that makes sense? I need a nut to go on the black thread shown in the picture. My local Renault dealer isn't much help and neither was the nut and bolt shop Anyone got any ideas or better still a...

Can anyone give me the part number for a phase1 172 throttle pedal?

I will consider myself lucky then! as I am mostly going forward.

Mine doesn't rattle but it bangs against the floor when selecting reverse. Its a small price to pay for its awesomeness.

With the help of Google translate, I managed to save a load on these compared to k-tec. Mostly because their shipping was 77EUR compared to K-tecs GBP120 to Tasmania. I will get them quicker as well. Here is the link if anyone is interested...

After my frustration of trying to deal with Cook Sport, I was probably a bit harsh on Kam Racing. I have their details now and I am going to order them. They have done a good price and are assisting with spring rates.

I am going to give them a go, but I think they are going to be pricey. THX

So, I called Cooksport and spoke to some teenager who couldn't get me off the phone quick enough (Ironic, as I was the one paying a dollar a minute) and was promised a response...and got none. So then I called kamracing, initially it looked good, I was told to send them an email and they would...

I will give it the weekend and then pick up the dreaded phone and call them. I want to use these guys as I am sure they can help me with spring rates- set up etc.

Surprisingly we do have phones down here. Its just a little awkward time wise-its 9am here. Besides I find most businesses are quite happy to respond to email enquiries.

Thanks Guys I have sent Cook Sport 2 emails over the week with no reply. Anywhere else I can order them from?