Search results

Hi guys, anyone know if clio turbo is still going? Trying to find there website but can't and can't find them on Facebook either?

Can anyone recommend a good company around the Sheffield Manchester area to get my alignment done? Need the toe and camber adjusted :) Thanks

I'm getting my brembo 4 pots powdercoated, there going to be sand blasted then powdered and then a coat of laquer As the pistons are siezed and ruined on 1 caliper I'm going to replace them on both calipers, I'll need x8 piston and x8 piston seals and x4 new bleed nipples Is there anything...

How accurate will this be? http://m.ebay.co.uk/itm/SAVE-GARAGE-COSTS-DIY-Magnetic-Vehicle-Wheel-Alignment-Camber-Caster-Gauge-/331612568166?nav=SEARCH I can get my toe adjusted for free from a mate but they don't have camber gauges, so was wondering if this could be used and will be accurate...

I need to replace my front abs ring I've got a 182 cup so need the ring with 44 teeth and 16mm in width, I've found a one here can anyone confirm this is the correct ring I need or is there anywhere that sells them cheaper? As they are £35 before vat Thanks...

I've seen people have used car pro Dlux on headlights as that's a plastic/wheel sealant, I still have some carbon collective wheel sealant left was wondering if I could use that on my new headlights? It's marketed at been an alloy wheel and metal sealant not plastic like DLux, I don't want to...

My turbo to manifold is blowing, I've managed to tighten the top 2 nuts as tight as I can but 1 of the bottom nuts is that loose it's spinning by hand, what's the easiest way to get at it to tighten it up? Carnt get a spanner or anything near atm Thanks

Just up graded to megane 4 pots on my 182, fitted then bled them and the pedal had a lot of travel before any braking effort, I re-bled them incase I had an air lock but it's still the same. I'm wondering if it's the standard master cylinder and it carnt cope with the extra size of the 4 pots...

Hi all I'm fitting my megane 4 pots with the 280mm brackets under 15" pro race 1.2 et 35, I'm going to use 10mm spacers, question is will the caliper clear the wheel weights or will I have to have them mounted on the out side of the wheel? Thanks

Where is the cheapest place to get the cl5s at for megane brembos? Cheapest I've seen so far is ktec?

Anyone on here part of this or who has spectated it before? It's at croft on Saturday and as that's my local track was thinking of coming down to watch What's the format? 1 race pack up and go or is it an all day event? Also is the public allowed to spectate Thanks

I ordered my Ast coilovers to have a spring rate of 450 front and rear I know the front are 80kg which work out at 456 lb but the rear have this written on the rear spring 200-70-51 Will that be 70kg and 399 lb? Also if that is correct surely a stiffer front is bad and will in-courage under...

Owners of the pms exhaust (182) post your pics of the fitment ( mid section ) please and videos

Can anyone recommend a good quality sun strip for my track car please, and where you got it from thanks

http://pages.ebay.com/link/?nav=item.view&alt=web&id=111623622197

http://pages.ebay.com/link/?nav=item.view&alt=web&id=111623622197

Anyone know where the cheapest place to get the above wheels from in 15", been quoted £400 from demon tweeks Is there anywhere cheaper or worth contacting to try beat that price? Thanks

Just need something cleared up asap bidding on some td 1.2 wheels 15"x7 et30 on eBay question is.... Would I still get the same 5mm brake clearance with et30 as aposed to et35 with 5mm spacers? Would it = the same amount of spacing? It's to clear 4 pot brembos on the front? Also will et30...

what jacks do you have to work on your cars? im after a one thats low enough to get under the car past the front jacking point sill and onto the triangle shaped metal frame? cars currently on cooksports so fairly low, when my ast coilovers arrive ill be hoping to go lower than how it is now, and...

ive recently fully stripped my clio everything bar the dash, is it worth trying to sell the headlinning, seatbelts and plastic trims etc or just bin them? i know the seats will sell so ill put those up for sale shortly once ive got my bucket seats in thanks

I'm in need of some coilovers, I'm currently on cup shocks and cooksport springs all round, there fine on the road but way to soft on track and since fully stripping the car are actually very twitchy and un predictable. Ive done a lot of searching and research and think AST's will be the best...

Ive bought a rear cage from ebay for my 182, all the interior apart from drivers seat and dash is removed, tried to get cage in via passenger side door with no luck, has anyone got any tips or advice to getting it in? or will I have to remove the drivers seat aswell? Thanks

I'm Getting my alloys centre bored tomorrow as there currently to small to fit onto the hubs, ive searched and found that the hub is 60.1mm on a 182, can any one confirm if that's correct? What diametre will the centre bore on the wheels have to be? And also how long will the centre bore need...

Just bought a rear cage off ebay and I'm going to spray paint it with Hammerite smooth, each can is 400ml how many cans would you say I'd need?

Just bought 1 of those cheap 160 pound rear cages from ebay and im going to get it welded in insted of bolted, whilst I'm there at the fabrication company im going to ask them to weld a steel bar going across from 1 rear arch to the other to act as a sort of rear strut tower brace, going to ask...

Went for a drive in car abs, tc and serv light came on so I turned the engine off and back on again whilst still moving at a slow speed of 20mph next thing the car is revving hard and driving its self so I pulled over and put it in neutral and its holding a constant 2500rpm if I blip the...

Does any1 know the DB reading at idle and part throttle with a piper catback exhaust on a 182 with the standard cat on? I'm hoping itl meet the 88db limit at the track day I'm wanting to book. Thanks

Whilst driving today I herd something come loose on the front of the car and then rattle then dropped out onto the road I managed to pick it up and its a bolt, same happened about a week ago but never managed to find whatever has fallen out, I've looked at what I can around engine bay and Carnt...

This bolt!

Hi all, going to purchase the silverline rotary polisher and also the 3M polish sample kit which includes fast cut+,fine cut and ultra refine, each are 250ml what pads should I purchase aswell? Car is badly swirled up and has a few deeper scratches here and there aswell. is the paint on my...