ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Search results

  1. Nyall

    Corner Weight/Setup Service

    Currently rebuilding my Clio, when it’s all put back together for the summer I shall be booking in with you for sure!
  2. Nyall

    Ph1 Driveshaft Rebuilding.

    With Ph1 172 driveshafts no longer being available, has anyone had a crack at rebuilding theirs? Currently have both shafts off the Clio, original Renault units and even original Renault stamped CV boots, however, they are beginning to deteriorate and need replacing. CVJs have no play and seem...
  3. Nyall

    Dunball Service Station, Bridgwater

    Spotted a Monaco Blue 172 with black Williams Speedlines. Was parked up in the Budgens garage at Dunball Roundabout around 20:15. Anyone off here?
  4. Nyall

    Stud / Nut Vs Wheel Bolts

    TPIs will rust eventually, my set have. Couple of bolts ended up stuck in the 17mm socket when removing wheels the other day. They will probably clean up and be fine, but I’m converting to studs for ease. Do love the look of the polarised bolts though.
  5. Nyall

    The new tool thread

    Well, they arrived. Nothing remarkable, just a set of spanners that will get the job jobbed. Reading through this thread has inspired me to sort out my toolboxes though (and spend money) 😅
  6. Nyall

    The new tool thread

    Only snag with the Halfords Advanced combi set is the range, only goes up to 19mm. Ideally need a 21mm in there too. Went for the Sealey Premier set in the end, 6mm through to 22mm, all for £28 delivered and a lifetime guarantee.
  7. Nyall

    The new tool thread

    Lads, I’m on the hunt for a metric combi spanner set, something half decent, any recommendations? Looking at a Sealey set (6-22mm) and a Nielsen set (6-32mm) on eBay... £28.10 and £29.99 respectively. What are peoples’ thoughts on Nielsen stuff, good or no?
  8. Nyall

    Jekyll's RB182 Progress Thread

    This thread really makes me want another RB 182. Anyone wanna buy my Volvo?!
  9. Nyall

    Track day oil for 172

    Pretty sure the F4R doesn't like Castrol stuff, or so I've heard on here, not that I've used it myself. Fuchs Titan Race Pro S 5W-40 in my Clio.
  10. Nyall

    Track/Race Car basic preperation

    You shouldn't really keep a torque wrench preloaded. Over time it will ruin the workings inside and render the tool less accurate. As an aircraft engineer we're told never to do this, always zero the tool after use!
  11. Nyall

    Cleaned RB182

    Very nice @Dr Jekyll I do love an RB, seeing yours makes me want another one! Good luck with it dude, I shall be following the progress thread!
  12. Nyall

    Best oil

    Personally, I use Fuchs Titan Race Pro S 5W-40 supplied by Opie Oils, very reputable oil experts, and only 20 minutes away from me! I know some others play around with the weight/viscosity of their engine oils...
  13. Nyall

    Piston Heads Sunday Service - MBW 2016

    The size of those calipers!
  14. Nyall

    Volvo S40

    Have you got it advertised on Auto Trader etc? I would personally leave the price where it is, for now. If people show interest, and make you an offer then they will low ball you, it's human nature as everyone wants a good deal. You want to compensate for this, so keep the price on the higher...
  15. Nyall

    Volvo S40

    Looks great @Dr Jekyll and you wouldn't look at it and think it's been lowered, very subtle drop but suits it perfectly. GLWS, very good ad actually, very detailed! One thing I would suggest, has it had the cambelt done? If it has then add that into the advert. The cambelt on these 2.0D's are...
  16. Nyall

    Volvo S40

    Yeah the Volvo's bearings are incorporated into the hub, rather than the brake disc. You can't buy a lose bearing, you have to buy and replace the whole hub. Pretty straight forward job though, literally jack the car up, wheel off, caliper off, unplug ABS sensor, disc off, then undo the three...
  17. Nyall

    Volvo S40

    The S40/V50 Sport comes with Eibach springs as standard iirc, so I'd imagine the ride height would be similar to a sport pack'd car, probably the same springs! Carparts4less (Euro Car Parts' cheaper sister company) have SKF rear wheel bearings/hubs for £86 (there's probably a discount code...
  18. Nyall

    Volvo S40

    Yeah, I've been using Parts for Volvos to price up the parts and as suspension goes it is a fairly cheap upgrade, probably alot cheaper than genuine Volvo stuff! Well this month will be two front wheel bearings and next month will be Billies, Eibachs, top mounts and spring caps. Has your ride...
  19. Nyall

    Volvo S40

    @Dr Jekyll how are you finding the B4/Eibach set up? Been looking at the same for my V50. How much did the top mounts set you back, if you don't mind me asking?
  20. Nyall

    [May 5, 2015] Falmouth Meet (Falmouth)

    You didn't miss much @Oli. It chucked it down soon as we arrived, the car park was mobbed and the pub was crowded! Some nice twisty roads around there though, and it was very scenic. Some cool cars in the car park too, a ratty bay window VW bus amongst them!
  21. Nyall

    [May 5, 2015] Falmouth Meet (Falmouth)

    Yeah, looks like it's you, me and @Dan so far!
  22. Nyall

    [May 5, 2015] Falmouth Meet (Falmouth)

    Brilliant, are you bringing some Megane guys too @Oli.? If so, could you get some numbers for me so I know how big a table to book. Cheers!
  23. Nyall

    [05/05/15] - Falmouth Meet

    Here's a link to the event guys, which can also be found in the SW region forum; http://www.cliosport.net/threads/may-5-2015-falmouth-meet-falmouth.773783/
  24. Nyall

    [May 5, 2015] Falmouth Meet (Falmouth)

    Falmouth Meet, taking place at Pandora Inn on Tuesday 5th May at 7pm. Food, followed by photos/drive. The meet will start at 7pm, with a meal at Pandora Inn. Average price of a main meal is roughly £12-£14. Pandora Inn has it's own car park, which shouldn't be too busy on a Tuesday evening...
  25. Nyall

    [05/05/15] - Falmouth Meet

    Update on this guys... I'm going to make this meet earlier by one day. The meet will now take place on Tuesday 5th May, 7pm, at Pandora Inn, Falmouth, TR11 5ST. I hope this hasn't messed up anyones plans, and I hope to see some of you guys there after the Bank Holiday weekend! Cheers, Nyall
  26. Nyall

    [Nov 6, 2015] SW South monthly meet (Par)

    Only just read your message, I'm in Plymouth this weekend, but split my time between Plymouth and Helston. Any pics from today?
  27. Nyall

    [Nov 6, 2015] SW South monthly meet (Par)

    Unfortunately not mate, the car is out of action due to the front nearside caliper binding quite badly. So I'll have to pull the front calipers off the car and rebuild them, and replace the brake disc as the heat from the binding caliper has warped it.
  28. Nyall

    [05/05/15] - Falmouth Meet

    Just to clear any confusion, the meet will still take place at Pandora Inn at 7pm, the only change will be the date; to Weds 6th May.
  29. Nyall

    [05/05/15] - Falmouth Meet

    I'll postpone this Falmouth meet by a week or two, to enable us to stagger it from the Par meet. @McGherkin, if you're happy to continue your Par meet on Saturday and for the future, then we'll see if we can do the "various locations around Cornwall" meets 2 weeks after the Par meets if that...
  30. Nyall

    South west auto sport club stand

    I might pop in for the day, probably Saturday as I'd imagine most of the campers will be a little hungover on Sunday morning! Not sure I'll be able to bring the Ph1 though.
Top