ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Search results

  1. JezzaMac

    Stu's Sunflower Ph1 172.

    Some pace on this build now [emoji102][emoji276] Looking good mate!
  2. JezzaMac

    Doing Track car / track day wheel alignment

    Looks good David. We made some wee stands to sit the car on which gives you plenty space to slide under and adjust the track rods with the car still weighted and strings setup. What are you using to measure camber? I need to get me a camber gauge!
  3. JezzaMac

    Low boost to mid boost

    I ordered this one: https://www.engine-dynamics.com/Products/Product.asp?departmentid=95&id=104787 1.30mm thick
  4. JezzaMac

    ACS roll centre kit ??

    What are the dates on V1 and V2 designs? I purchased a kit in November 2020. Assuming these would be V2 and no need to upgrade the pins to the new design? Ta
  5. JezzaMac

    Jamie's boosted flamer

    It actually felt pretty good certainly wasn’t struggling with turn in or mid corner grip but I probably wasn’t going quick enough for setup to be an issue! Lol Want to get a few more track days under my belt to get used to the car and driving it quickly! Could be tempted in the future though...
  6. JezzaMac

    Jamie's boosted flamer

    Been a while since the last update but the cars had a few more bits and pieces done to it. I bought a PRO-AM racing roll centre kit on a black Friday deal which I just fitted last week. Nice bit of kit and looks to be nicely machined and everything fitted together well. Took the opportunity to...
  7. JezzaMac

    A few pics of the inferno

    Me and Heez both used to own this! Can confirm that it is a good wee motor and wasn’t abused or driven hard by either of us! Was just a road car when we had it!
  8. JezzaMac

    Grinding thread - (not dirty you perv!)

    Seen this on Facebook the other day... grinding isnt for everyone [emoji23]
  9. JezzaMac

    Jamie's boosted flamer

    Not really much to report. Progress has slowed now that I’m back to work. Managed to get the foot plate painted, just need to get it bolted into the car and then apply some grip tape in the correct location. Also got the roll cage in with a little help from the feline friend! Also got the...
  10. JezzaMac

    182 turbo oil feed & return

    Tapped it into the block. There is a small flat area just above the sump which is big enough to tap, thread and fit barb. You can see it in this photo:
  11. JezzaMac

    182 turbo oil feed & return

    I bought the pre-made engine dynamics oil feed pipe for convenience and then made my own drain with just 2 threaded barbs, a length of hose and 2 clamps. The drain was less than £15 to do. I’m sure you get a Cliosport.net discount on the engine dynamics page if you setup a registered account...
  12. JezzaMac

    What have you done to your car today ???

    Changed my broken gearbox mount which has sorted my exhaust knock that I’ve had for ages. Mount must have been broken for months [emoji51] whoops! Glad it’s sorted now though!
  13. JezzaMac

    182 Clio Turbo Options

    The hardest thing I found was making sure that everything fitted together correctly and that I was getting the right sized threads/fittings for stuff etc. A bit of research and searching and you’ll be sound [emoji1417]
  14. JezzaMac

    182 Clio Turbo Options

    I’ve had 2 turbo Clios. The first one was a ClioTurbo build (before they went totally to s**t) on a T28 Chinese turbo. Never had any problems with it and is still in use having done 2 seasons of SLS at knockhill. It made 232BHP when mapped by Chris at EFI. My new build I decided to go with a...
  15. JezzaMac

    Jamie's boosted flamer

    Chewing gum and duct tape it is!!
  16. JezzaMac

    Jamie's boosted flamer

    Finally sourced a second hand cage. Safety devices R017. Any tips for fitting?
  17. JezzaMac

    DIY spraying inside of car - Tell me know

    1985michael182 is it just one coat of colour? Would 1L of colour be enough to do interior including roof?
  18. JezzaMac

    DIY spraying inside of car - Tell me know

    I’m in the same situation here and looking to paint the inside of my car that I just stripped. I’ve got a compressor and a cheap suction spray gun. I’ve rattle canned a few things previously but never sprayed with a compressor. I’m struggling to work out what I’m looking for. Not looking for...
  19. JezzaMac

    Clio 182 - road car / track car / race car

    I followed the same guide. Think I struggled with 1 clamp that was a bit tight but I got there in the end!
  20. JezzaMac

    Clio 182 - road car / track car / race car

    I ordered the same coolant hoses. Make sure that your current hoses have 2 black ends that go into the heater matrix as mine had one black and 1 silver and you can’t remove the silver one so I had to find someone willing to butcher a set of hoses to send me just 1 black end! You will also...
  21. JezzaMac

    182 Full fat track slag!

    Mint - think I’ve got some white spirit in the garage! Will dig it out and give it a shot!
  22. JezzaMac

    182 Full fat track slag!

    I’m having a shite time with this bit of glue on the roof as well! Lol
  23. JezzaMac

    Back again! Flamer 172 Road Trip/Track car

    Looking good! I need to get me a shifter!! Looks like Ash did a no bad job cleaning it!!
  24. JezzaMac

    Rear Strut Braces

    I may add I’m not condoning this! But it sounds and looks like the OP has their mind made up on installing the harnesses whatever it takes! Lol Not sure why you wouldn’t just wait, save up and do it properly once rather than half arsed and have to do it twice [emoji848][emoji2373]
  25. JezzaMac

    Rear Strut Braces

    If your desperate to get harnesses in you might as well just get some eye bolts into the original seatbelt Mounts? Then when you get a cage you can just take them out and mount the harnesses on the cage like you say?
  26. JezzaMac

    Members in Scotland

    Very similar setup to me! Also have a turbo 172 flamer and E91 330d Touring [emoji41] Located Edinburgh.
  27. JezzaMac

    What have you done to your car today ???

    Yea I was lucky as I had most of the stuff left over from doing my garage roof. Probably would of cost me the same amount as the CM composite one if I had to buy all the required stuff.
  28. JezzaMac

    What have you done to your car today ???

    Made my own fibreglass foot rest/tray. Going to make a passenger side one as well then just need a bit of sanding and painting and a bit of grip tape then they are good to be fitted!
  29. JezzaMac

    Jamie's boosted flamer

    Decided to have a shot at making a fiberglass foot rest/tray. I had pretty much everything left over from fiberglassing my garage roof so decided it was worth a shot! First up was to make a mould out of MDF Next up was to lay a couple layers of fiberglass into the mdf mould to form the...
  30. JezzaMac

    Arctic 182 for Track

    Mine came with a cage. I just mounted it at the rear of the spare wheel well with a few of those self drilling screws. I’m doing to get some rubber strips to put between the cage and the body though because it’s earthed because of the earth strap so it’s slightly dangerous when swinging a...
Top