Search results

So finally the ARP clutch bolts turned up from USA after snapping an OE one in the flywheel, I ordered ARP ones as they have a normal hex head opposed to the Renault that are torx, New genuine Renault flywheel bolts. Used some 270 loctite on them, Engine is now in and with the ti heat...

Slow updates, even though the car is in the garage Its an hour away from home so finding time is hard with studying an apprenticeship and college work. Went to Autosport back in Jan though, great event, any one that hasn't been needs to go next year! I know I wanted a few bits and its a...

Some parts back from the powder coaters Gearbox engine mount Engine mount cover Inlet manifold And a few other brackets, not going to mad as you won't see most things and still want the car looking O.E, these cost £100 as it is. Really pleased with the results, so much better...

Ds1.11 like you said, sounds like a winner, I love them, yes they are expensive but I can't falt them and should you really buy cheaper brakes just because they are cheaper Also where did you buy your seal kit from? Thanks

So being 6ft tall, I find with the seat far back, the steering wheel feels a little stretched with the harnesses on, I see this neat spacer a guy in Monza, Italy the he had made up to retain the standard wheel as we want to keep the controls and clubsport look, please get in contact with him if...

Hi Russ, I've only seen them on eBay from that Ro fag guy that sells loads of genuine renault sport stuff, there aunt cheap and I'm almost weighing up just buying new arms and keeping these as spare, £75 EACH plus £10 postage...

The car had it in, but my brother had an Alien green 200 before as yes it felt different but, different not really any better or worse just feels like a deferent car. This grey one handles well enough with just the springs.

So after striping the car down, found a few ball joints could do with replacing, they weren't to bad but rather do them now, Lower arms, dropped them off at a friends work shop, the lower ball joint that goes into the hub screws out with a bit of heat a punch and hammer, new OEM ones to be...

This was a Pistonheads sunday service at Silverstone earlier this year, Jack my brother took the car as I was away. In the McLauren tiled garage at the start of the day....... On track with some M3 friends And the number plates Dirty end to the day

Stick attached to the passenger head rest upright bars then like a handle bar mount get good views, cable tie or jubilee clip, and some people I've seen pull down the inside light and hang it from there

Just ordered these. We were after a good quality wheel stud to replace the current bolts, first off the bolts are a pain to line up with the spacers and second they have seen a fair amount of work, some people say you should replace every season due to the stretch and strain they are put under...

Yeah its quick enough on the roads not many things get away Yeah just buy giant coins made by Velco' of eBay to stick them on with like here This was early 2016 at Snetterton, the car was still so good in the damp/wet conditions, the traction control system works so well pulling the car back...

Goodwood

Snetterton before the cage and seats

Thanks everyone

looking good, dacia sandero is meant to be the header tank to use, sits in that place better. did you need to trim the intercooler pipe much. you will love once its done, like you say its not cheap and if you done any less than you have done you would be cutting corners i like all the bits you...

Wanted to get a quick thread up to keep an up to date log of what we get up too, Joint car owned with my brother simply for track days, fast road and Nurburgring. This year it done Snetterton Silverstone Nurburgring 22laps Goodwood Late 2010 Storm Grey Clio200 Engine spec, R26...

Very nice proper tidy job on the engine getting it ready, look forward to seeing it going in

the name cliosport gives it away! whats is this, 1.2 shed.com

Awesome, pleased you finally got this finished. Been a long time coming but looks worth it and so different to all the other cars on here. Well done! ​Lewis

Remember its Time Attack not 'racing' Save it for CSCC James!

Ahh was hoping for a decent updated. Not to find it's being broken! :( Keep the sell unless you offered decent money for it, everything else can be replaced with out loosing to much. All the best with the house.

Can't believe you cut up the clio Cup cage, it doesn't evan fit the A pliers.

Sad to see end this way. Guess its called growing up, situations and priorities comstantly changing. Been a good read though. Have you thought about selling up everything, and just getting one car that does it all, daily and the odd trackday? Half decent e46 m3 with ap's and a set of coil...

Good work, didn't realise you had done so much from what you was saying today. Shouldn't be to much longer the rate your going Get that track day booked then you have to date to aim for! Lewis

Really, how am I? Didn't think I was doing to bad in my 1200kg Focus on standard road suspension and some old a048's. First track day an all. Last time I camp in your back garden Tony lol

Cheers likewise, so much more to be done though.

Bought some bumper repair brackets. Moved the drive around and got the beetle back In the garage as I don't think that I'll be finished this year either :/

Agreed it was a real windy day while getting used to a new welder. I sore someone else had done it that way and it stopped it just blowing a whole every cm, grinding it back so you will never see it. Yeah was alright, don't think this will be worth much. Hopefully getting a 172 cup of a...

Time for an update, Took the engine out a couple of weeks back, borrowed a crane as I've taken the winch down. Wouldn't normally jack on the sub frame but it was guna be scraped anyway. Bought a OMP steering wheel of a mate that I've nagging to sell to me for nearly a...