Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Its come time to replace all 4 tyres on my ph1.
Ive been using toyo t1rs for the last 8 years. Theyre a good tyre. Offer plenty of grip. But always wear out on the side walls first.
The car is lowered. But the geometry is set up right.
Just want to know. From peoples experiences, if there is a...
Itg replacement filter
Larger cold air feed pipes down to fog light hole
280mm brembo 4 pots with brembo max disks
25mm spacers on front
Ktech coilovers
Whiteline arb
Fully pollybushed
Decat
Janspeed catback
Rs lower inlet
Fastchips remap
Ph2 cup gearbox with bolted diff
This light used to come on, on my wifes old 1.2. Found out that the earth strap from them gear box to the body was breaking. As it snapped one day and wouldnt start. Light never came back on ever since i fitted a new strap.
Worth looking at.
I had this for months. Replaced aload of stuff.
In the end i got someone to rev it for me while on the ramp.
Found that one of the springs on the manifold to cat joint on the exhaust had snapped. And the bolt was just hanging down rattling on the exhaust.
I have a db meter if your near gloucestershire.
and the phone apps are junk. As i compared several to my meter and they were miles off.
my car read 96db on my meter and read 92 at castle combe
Combes better with less cars out. Ive done track days with combe them selves who let 20 cars out at a time for 15min sessions.
And javelin who let 12 cars out but open pit lane. So you get less conjestion behind slower cars.
Also theyve resurfaced most of the circuit. So in the wet youve got...
I replaced the cam belt and dephaser pulley at the weekend.as the pulley was rattling like crazy.
And the noise has gone.
for anyone else with this problem.
Check the spark plugs are tight. Mine have come loose a couple of times even at the correct torque.
And makes that sound when they are loose.
also seen it on a few other cars, where it sounds alot more serious then that.
No. Deffinatly not a rattle.
From in the car. Its sounds just like a turbo charged car. With a boost leak. But it comes on dead on 4k. And goes by 4.1k revs
Just recently. ive noticed a ffffffft noise at 4k revs on my ph1 when under hard exceleration. Doesnt happen at any other revs. Or when going slow up the revs. Theres no power loss or anything else wrong with it. Just wondered if its any thing to worry about.
Has anyone else had this noise...
probably going to sound realy dumb here,
i bought an rs tuner. ive got it unlocked for my car now,
so i need to buy the maps, on the fast chips web site when buying the maps it says,
Please provide us with your previous RSTuner order .nr and interface firmware .nr in the comment field. Without...
the lumbar support on my ph1 hasnt worked since i bought the car 2 years ago.
i popped the seat cover off yesterday to have a look at whats going on. the cable and everything is working and attached as it should be.
but on the other side of the seat there is nothing holding the lumbar frame to...
ive had the same problem with mine. spent ages looking for the problem.
it would make a very loud metalic crack sound, that you could feel through the floor of the car, when manouving lock to lock when parking.
we put it on the ramp and had someone go lock to lock with the steering, while we...
There is a gearbox in the sale section. To check the drive shaft. Jack the car up and check the shaft for any play. Up and down movement and see if you can twist the shaft with out the wheel or gear box moving. But i highly doubt it will be a shaft
ive got the same problem with mine. checked all ball joints and bushes. and theres no obvious play anywere. getting very annoying and suppost to be going to scotland at the weekend.
so would be great if someones got any suggestions
the only exterior lights that are testable are,
side lights, number plate lights, 1 rear fog on the drivers side (2 maximum), brake lights (if a 3rd is fitted it must work) indicators, dipped and full beams.
front fogs and reverse lights are not tested, but they may advise if they do not work...