Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
I’ve bought a mechanical Racetech dual oil pressure and temperature gauge. It comes with capillary lines. Has anyone fitted this type of gauge? Where’s best to connect the capillaries to the F4R?
oil pressure switch or a sandwich plate?
Any help much appreciated
Anyone know of a company or such that can print them with a 52mm hole in the center.
I know there’s a guy doing ph2 vents but doesn’t seem interested in doing them for the ph1
Any help much appreciated
Does anybody know if the Renault sport Clio MK3 master cylinder fits the Mk2 172?
Just wondering as I’ve done the 4 pot conversion and feel the peddle is a bit long. Would the other master cylinder shorten it ?
Thanks for any help
Hi. Some help please
I’ve bought a Mocal gauge plate to run a racetech dual oil temp and pressure gauge in the Clio. I already have a thermostatic oil cooler sandwich plate fitted to the engine.
Can I just fit the new gauge plate in front or behind the oil cooler sandwich plate with another...
I can’t (probably as I’m thick) find them.
Behind the fuel flap there are a couple of plastic bungs that keep the fuel flap flush with the body work...mine are missing and it’s grating on me now!
Can I get replacement ones or do I have to fit a whole new fuel flap assembly?
Hi
I haven’t actually looked yet but any heads up on what it could be.
When I first start and drive everything is fine no noise...perfect Clio.
Once I’ve driven and car has warmed up I’m getting a rotation noise/clunk from the front near side ? It is constant..one wheel rotation..clunk..gets...
So I've managed to jack my side skirt off.
What I don't get is why most of triangular blocks are not attached to the body work?
Any advise very much appreciated....and you can say I'm a c@@k!
Hi.. As title..for the Xbox one. Has anyone got one of these ? Worth the money ?
I'm not a "hard core gamer" but if it is that much better I could be persuaded!! 🙈
Hi guys
Ive got myself a DRE shift light and have read a guide on here about connecting to the coil pack orange wire. I just wanted to check with you guys that i have the correct one as the colour has faded on the 3 wires. I'm thinking it's the middle one ?
Any help much appreciated
Untitled...
Hi,
My window regulator broke and I've replaced the parts and the window goes up and down fine. The problem I have is, when I'm driving it sounds like the window/door is slightly open and and I get a wind noise even thou the window is fully closed as well as the door.
Has anyone got any idea...
Hi.
My ph1 172 failed its MOT on only one rear wheel braking on the hand brake. This was fine I thought..just get 2 new cables and that will sort it but no. They have tried a set of cables but they didn't fit and he has tried everyone he knows about getting the correct ones but can't find them...
Hi
Ive adjusted the nut under the car so much that the off side rear caliper is on and the near side calliper is not. Is there any other adjustment from side to side ?
Discs and pads are only a month old.
Thank for any help.
Andy
Hi
Can anyone help...
Ive got a ph1 172 and want to convert my window switches to the black ph2 switches. I have the ph2 switches with some loom and the connectors and want to cut my ph1 loom and connect.
I remember seeing a guide a few years ago about doing this conversion but can't seem to...
Hi
So this is on my 182 trophy. The joint has been blowing for a week now, so I took it to the local exhaust place today to put up on a ramp to see what the problem was. One of the bolts has totally corroded and no longer has the spring and on the other side the bolt has pulled though the down...
Hi
I have the k-tec kit which I'm really happy about it but with reading and being told horror stories about the k-tec air filter going down the trumpets into the engine. I'd like to change the filter set up for a better make. I've got a PH 1 172 so I'd like to know if anyone with the k-tec itbs...
Hi
Is it possible to remove the grill with out taking the bumper off ?? I want to change the headlight but can't get it out. I've changed the near side head light a couple of years ago and I'm sure I did it with out taking the bumper off. I'm sure I used a guide from here but I can't seem to...
Hi.. Recently my big end bearing went on my Clio cup.. I now have a second hand engine and about to strip the old one out and put this one in.. My question is.. Can you leave the gear box in the engine bay or do you have to take engine and box out as one ??? There doesn't seem that much room to...
Hi.... When I first start the car in the morning every thing is fine.. But when I go some where... Stop the car..go in to a shop or something which only takes a few mins.. Get back in car ..start it and the serv light is on all the time.. The next morning when I start the car the serv light is...
read this in the paper yesterday.Not much info at the moment only to say it will be much better than the rs 200
The new Gordini hot hatch brand, which he confirmed would launch in 2010, would sit above the existing Renaulsport troupe of hot hatchbacks. Expect a plethora of blue paint jobs...
Hi
I have seen the a.s.t ones but they dont seem to have a lot of adjustment. What i was thinking of doing was buying a set not desiged for the clio and making them fit. It would mean cutting the top off the suspention mount making the hole bigger.doing this would also reduce the length of the...