Search results

Will post location once it's confirmed, it says north west/ Lancashire at the minute, suppose to be confirmed by 12 o'clock

Decided to make myself a boot mat out of some carpet that was lying around

I have searched the Internet but not managed to get a definite answer! I have been offered a pair of Megane 225 brembos callipers, 182 mounting brackets, braided lines, and 300mm discs for £400! Mintex 1144 pads also, the whole set has covered 3k miles. I'm on the verge of buying them, I just...

Found that and thought I would spread the word! Seem to have a bit of interest on their Facebook page so was wondering who else would be up for it? Me and my mates are travelling over from Southport The more the merrier :)

Here I used 90mm-70mm silicone reducers an siliconed them into place in my existing fog housing! Cost about £20 off eBay for two, large variety of colour also :) Gives a 70mm rear now that you can couple up to with a cold air feed or a brake duct [emoji106]

Saw a clio trophy this morning which i have seen before! Seen a black 172 twice now also! And ny mates have seen a few more! Anyone on here, me ane my mates meet every now and then you should come along

a few of the locals are planning a meet, weather permitting this is! there's a sex clinic with excellent lighting and never has any cars there of an evening! so weather permitting we will be meeting here, anyone up for it?

I'm not sure where to put this, but I'm guessing it's electrical... when I brake my revs drop to 0 but if I release the brake they go back up, in an out of gear this happens! whilst stationary outside my house, I disconnected the wires to the brake pedal and tried again whilst in neutral...

I have read many of threads and just want to check what I have gathered... I plan to use engineers blue to see where needs to be matched! I won't be matching it to the gasket, so I gathered I should put the engineers blue on the lower manifold, and then press together this with the plenum...

how easy/hard is it to fit different seats to a clio? I have seen type r seats or impreza seats and was wondering how much work is needed? any help is appreciated thanks

had a north west performance sticker and cliosport sticker?

been looking into this more... I have a scorpion 192 with decat, and ktec style/ fattys induction kit! I'm tempted with pops and bangs but wouldn't want it all the time, is it possible to buy both maps and swap between them as and when? thanks in advance, any help would be appreciated a lot!

I'm at Ffarm country house in Betws-yn-rhos just been out in my clio, and saw a black clio (non sport) twice, anyone on here? I'll be about tomorrow also heading over to climb Elidir Fawr tomorrow also... if anyone's around watch out and make sure you give me a thumbs up [emoji6]

anybody used these ... http://pages.ebay.com/link/?nav=item.view&alt=web&id=301264277164 interested as I want to space my wheels 10mm all around! was also thinking of getting longer nuts that will stick out a bit further than the wheel, for aesthetics obviously...

just had a decat, new flange on my downpipe, a few strengtheners on the hangers and anything other holes it welded up! inbetween my downpipe and centre silencer I have a small flexi now where my cat use to be! at about 28 seconds there's a flash from under my car? any ideas?

decided to have a go at making my own after seeing how much they go for! bought some skoda washer covers, not knowing what would come! they were huge so I went about cutting them down I glued on my bolts with a radiate then I filed down my cut edge with a slight chamfer on it! here's my...

has anyone tried using anything like this? was thinking of taking this and somehow attaching a nut and bolt with a washer to it and fixing it in place?

I have a clio 182 with a scorpion exhaust, also running a ktec style induction kit! would a decat be worth it? not bothered about noise, it would be more for power gains? I would be looking into a remap once this is done as I won't be going any further with my engine! any help would be...

everyone will hate me for this noob question but what's the best to use? I have so read that putting the expansion bottle in the dishwasher is my best bet instead of a new one?

anyone on here? was slow traffic and you overtook and I overtook you, guessing you were waiting for your mate

anyone on here there now?

so yeah, I crashed last night! I was driving across a local country road and as I have been coming up to a corner braking, a car has been pulling out their drive so I'm braking and went tight left to the curb to miss the car who has pulled out! straight after this the corner turns right, i...

I have searched high an low but haven't found an answer to match exactly what I'm looking for... I have a clio 182 with xenon headlights, can I replace the side lights and fog lights with white bulbs? I hate the clash of the side lights and xenon and want something to suit better! has anyone...

has anyone used these on their clios? found a lot of good reviews online and I'm tempted to get myself 4 new ones for Christmas!

saw this blue 172 cup so I decided to park next to it :) anyone else from around the southport ways fancy meeting up just let me know!

as title says, has anyone had new cams fitted and cambelt done by an garage in the north west? looking to have mine done! any help will be appreciated! I have emailed birchdown awaiting a reply cheers, chris

winter is coming so I'm going to be working lots and saving lots trying to get some money behind me and get a few mods done ready for next summer! my question is, will matched inlets with cams and a remap be noticeable? I'm currently running a scorpion exhaust system and a pipercross viper...

so I got pulled by the police, I was doing 80mph down a dual carriageway which had about 3 other cars on and it about 9 o'clock at night. he was very nice about it all but ended up giving me a warning and said if I'm stopped again my car is seized. I did my research and this is what I have...

managed to get my hands on an omp front upper strut brace off here, just arrived today! n00b question but is there special bolts to use or do I drill and use nuts and bolts? cheers, chris

spotted a silver 1*2 last night and I have seen another 2 silver 1*2's?? anyone who lives in or around southport give me a P.M and we can go for a drive !