Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Since having my immobiliser rewired by Renault, I've noticed that my windscreen wipers are sitting about 2 inches too high in the down position when not being used :S
what could have caused this, and how can I adjust them ?
I've got a 172 Cup :(
the car has not been used for 3 weeks... I left it unlocked with the alarm and immobiliser off
got back to it yesterday and tried to start it, but it would not start. The immobiliser light was flashing slowly even though I'd left the car unlocked. When I turn the key...
bit of history....
I've got standard pads and discs on the front and back
I fitted a brand new rear brake compensator valve last week, fitted refurbed rear callipers from bigg red at the same time, also fitted new flexi brake hoses at the rear
bled the brakes with an eezee bleed kit...
I've got brake fluid going in to the brake bias valve, but none coming out :dapprove:
I've tried force bleeding it by opening a bleed nipple on the calliper, using an ezeebleed kit and manually lifting the arm on the valve up and down..... nothing came out of the nipples
is it possible to...
ive got no brake fluid going to the n/s/r brake caliper
i want to take off the rear brake bias valve and clean it to see if there's a blockage, how easy is it to clean? how do i clean it?
I've got some new calipers to fit, but not sure about how the hand brake works and how the hand brake should be adjusted
right....
i can move the arm that the hand brake cable attaches to, i can move it fully backwards and forwards. when i do this, i can't see anything else move, what...
I need to adjust my hand brake
has anybody managed to get a long socket over the adjusting nut without taking off the heat shield? would i need a flexi joint atached to a long socket to reach without taking off the heat shield?
what size are the two? adjusting nuts... are they 11mm ?
If i...
ive got no brake fluid coming out of the metal brake pipe on the N/S/R ..... I took the pipe off where it joins the caliper and no brake fluid comes out ( even when trying to bleed)
ive bought a new flexible pipe for it because ive heard these can get blocked, so i need to change it and see if...
I'm going to fit new rear calipers to the Cup tomorrow
Somebody told me that once i've fitted them, i have to pump the brake pedal a couple of times to get the pistons fully out before i fit the hand brake cable (and then adjust it ) is this true?
hello
my first post on here, so be gentle :p
I've got a missfire on my 172Cup, took it to renault today and they number 4 injector needs replacing, fair enough i said
asked how much they will charge and was informed £125 fitted for one injector :eek:
The woman on the service dept desk said...