Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
I'm in the final throws of converting a late Campus to a 172/182. Everything is basically swapped over and the car is running.
I reached the stage of bleeding the brakes and plugged an RS Tuner in to activate the ABS pump.
However, I'm getting zero communication with the ABS system. The RS...
After doing some reading on here regarding pattern part ABS sensors, I ordered the Triscan versions from Autodoc. I ordered all 4 since I'm reshelling a 172.
Autodoc have sent the Triscan front sensors. But due to stock issues, they have sent "Stark" branded rears without first telling me. From...
I'm in the process of reshelling a 172 and have come to the point of fitting a new clutch kit. The original flywheel mating face is in poor condition, fairly pitted etc.
I've had a search on here regarding this but can't find anything concrete. Can they be machined, do they have sufficient...
I'm currently building a 2008 Campus with 172 running gear and planning to run EPAS rather than the hydro setup.
The Campus obviously comes with an EPAS rack and column, but the more I search on here, the more results I find with reference to DCi racks.
Can anyone confirm either why DCi racks...
Ordered oil online and it doesnt spec the 'F' in the description but the photo shows it. Says it aids engine efficiency. Sure it'll be fine being good quality 5w40.
So I've had my 182 for a couple of years now and tbh not too much has went wrong. However a few weeks ago, the battery went flat (battery is 18 months old) and wouldnt start one night. So got the multimeter out and cheked battery voltage (12.50v) but not enough to turn the car over. So i jump...
If its as clean as described ... good god!
http://www.ebay.co.uk/itm/RENAULT-CLIO-172-2-0-LITRE-TWIN-CAM-16-VALVE-ONLY-28-541-MILES-/271130791706?pt=Automobiles_UK&hash=item3f20a78f1a
I'm a bit of an amateur when it comes to photography, I have a DSLR and enjoy playing with it. Thats as far as my knowledge goes. However Ive acquired this retro camera. A canon AE-1 program. It came with the base camera, 28mm, 50mm (x2), and 200mm lenses, top mounted flash, additional base...
So the story begins. A distant friend of mine bought a 53 plate 1.2 16v around 4 years ago, not being mech minded at all, never maintained or kept this car in good condition whatsoever (other than washing it)!
Skip forward a bit to summer last year. The car starts having misfire issues...
I've decided that I'm most definatley getting a jammer after a recent run in with the police on a backroad which involved trees, a radar gun, no hi vis jackets and me not paying enough attention. I'm not willing to let the opportunity arise again. I'll say no more.
So after much hunting on the...
I ordered a full set of 182 cup dampers for my car to then find out today that I dont have the cup suspension pack. I have already fitted the cup rear dampers. What are my options? Standard 182 dampers on the front or 172 cup dampers? What will match the 182 cup dampers that are on the rear...
If I get a ph1 172 horn/indicator stalk and fit it to my ph2 182, will the horn button operate my horn without modification? I've done this on a peugeot a few years back and it worked.
My old exhaust had really started to fall to bits so i ordered this last tuesday and it arrived on friday morning. It wasnt as hard to fit as others have made out and I done it on drive up ramps although it took a bit of adjusting to get sitting perfect.
The pics were taken before my final...
I have a 182 with cup packs and it had new dampers fitted not long before i bought it. My thoughts are though that the previous owner didnt really look after the car.
I was wondering if there is any way to tell the difference between cup dampers and non cup dampers whilst fitted to the car?
I thought I would post this up due to the amount of interest that the large scottish meet generated. It was unfortunate that nothing came from it so I came up with this.
I'm not going to mention any roads as of yet but here is a rough idea of what I have in mind. Meet at Stirling and head to...