Odyssey ph1 172 pure track car. No tax discs here........

[Rhys Beal]

Hello to all

Yesterday I picked up my new project. It's a 2000 Odyssey ph1 172 with just under 90k and only 2 owners from new, oh and it's completely standard
Here she is
http:// Untitled by Rhys Beal, on Flickr
http:// Untitled by Rhys Beal, on Flickr
http:// Untitled by Rhys Beal, on Flickr

Only thing missing in the pictures are the arch linings as I had just removed them to pressure wash underneath the car.

So my plan is to have it as a solely track car and trailering it to site which means I can make it pretty light

Spec to be will be something along the lines of:
- Completely stripped interior with the multi point Custom Cages cage TIG welded in.
- ph2 top dash
- Schroth harnesses with bucket seats, but not sure which ones yet (possibly Motordrive)
- In board race battery and proper cut off switches
- Polycarb windows throughout and maybe a heated front screen
- AST coilovers
- Whiteline rear ARB
- Spherical bearings instead of the rubber bushes
- Stiffen up the front wishbones with PMS kit
- Remove the air con
- Run a v6 air box straight off the throttle body and an air feed from the headlight that will be adapted. (both headlights will be gutted and blanked black)
- New cambelt kit (for my piece of mind despite it is not due)
- Catcams 421's, maybe a little flowing to the head and ARP bolts
- 182 exhaust manifold and a single silenced system that replicates the cup racer system
- DS3000 pads
- New rear discs and a general brake overhaul
- Goodridge braided lines (already bought)
- New track rod ends and ball joints to just sharpen things up
- Service everything as I remove/come across it. Engine, gearbox, pas etc...
- Fit an engine oil cooler and pas fluid cooler
- Fit my alloy bonnet that I purchased today (needs prepping and painting first....)
- Retro fit a single wiper from an ax
- Eventually sell my black OZ F1's and replace them with white 2118's and slicks

There will be other stuff in between all that, but that is the main bits and will be over a period of time.

Hope you enjoy

Rhys

[BIGASH]

Wow sounds like great plans mate the car looks like a great base to start from. I will look forward to seeing the updates! I hope you have a good friend who can TIG weld the cage otherwise that is going to be an expensive job I would have a chat with TDF/Roll centre about a cage as it works out a fair bit cheaper than custom cages! If you need any advice or help then you know where I am and always happy to help

[Rhys Beal]

Thanks very much James
The cage all in should cost me around £1300 and that includes putting stays down to pick up the rear wishbone mount........might have stolen the idea from somewhere there
The chap is only 2 miles from me and is exceptional with a TIG welder, it is an art what he does and I want my cage to look a little special

Did I read somewhere that you will be at Brands on Monday?

[BIGASH]

Ahh that sounds good then Rhys Yes TIG is the best way to do it and it will look the nuts! Haha lol! Have you got a completion date planned or just take as long as it takes?

No I was there last Tuesday and i'm there on Monday the 7th May for the first race you should come down as it would be good to meet you again !

[LewisTaylor]

Looks a minter, and some good plans, good luck with it mate

[Rhys Beal]

No date planned so will just be an on going project that reaches the spec as soon as I can really.

I will come down as it would be good to see you again and see your day through. What time will you be there from?

Thanks Lewis

[v16daf]

Plans look good :-). I have a headlight that you might be interested in? Bought it off Mad Max from here few months ago. Only want what I paid for it - £60 delivered. Dosent fit in with my plans any more

[Rhys Beal]

Thanks very much for the offer and would love it but I have a ph1

[BIGASH]

Sounds good, well as said if you need any help or advice you know where I am

Perfect nice one mate ! I think signing on will be 8.45 so will be there from then until end of the day but when the timetable is released I will post it up in my thread!

[Rhys Beal]

I shall keep an eye out for it then, but will definitely pop down and because of it being a bank holiday, I shall leave early to get there pretty much when you do

[BIGASH]

Perfect thanks I will drop you a message nearer the time Keep the updates coming with the car! I've subscribed

[Rhys Beal]

Thanks mate and I will try

[v16daf]

Thanks very much for the offer and would love it but I have a ph1

Doh!!! Lol

[dmallett]

Very nice Rhys, should be epic

[R1XPH]

Looking forward to updates!

Get the AST's ordered ASAP if you want to see them this year.

[TheEvilGiraffe]

Good effort !!

£1300 for a cage seems like a lot of money on a cheap car but I guess it might save your life one day. You can't put a price on that !

Why are you putting a dashtop in ? I hope you're removing a limb to compensate for the weight ?

[Rhys Beal]

3 areas that I will spend as much as I can afford on and that will be:
-Safety
-Suspension
-Brakes

Like you say, I hope the cage will never be used but I would like to think that if it is, I am as safe as I can be.

Are the ph2 dash tops heavy?
In that case I may run something else

[Rhys Beal]

Looking forward to updates!

Get the AST's ordered ASAP if you want to see them this year.

That's the thing with AST, they offer such poor customer service but what other dampers are out there in this price bracket of this quality and ones that I can change springs on for "off the shelf" sizes"?

[TheEvilGiraffe]

Ph2 dashtops are heavier than no dashtop

[Rhys Beal]

Haha oh I see

I what see what comes of it as I don't think by the looks of it that I can run the top of the ph1 dash?