Page 1 of 2 1 2 LastLast
Results 1 to 20 of 21
  1. #1
    Forum User
    Join Date
    Dec 2008
    Location
    Manchester
    Posts
    4,363
    Car
    Mk1 Focus RS

    Removing ABS sensor

    Following on from my ABS issue thread, I've found out my nearside front ABS sensor is at fault. The wire going in to the sensor it's self is frayed and very loose, so it needs replacing. I've searched around the forum and all I've really come across is how difficult they are to remove. I've not attempted to remove it yet but is there any particular way to remove them, i.e small screws holding it in place?

    If worst comes to the worst and I break it trying to remove it, would it cause any issues trying to fit the new one?

  2. #2

    Re: Removing ABS sensor

    Can be a paint to remove best off oiling it and any other trick you can think off.

    SO long as you don't damage the hole or the screw thread you'll be fine if you destroy it when you remove it,

  3. #3
    Forum User
    Join Date
    Dec 2008
    Location
    Manchester
    Posts
    4,363
    Car
    Mk1 Focus RS

    Re: Removing ABS sensor

    Quote Originally Posted by edde View Post
    Can be a paint to remove best off oiling it and any other trick you can think off.

    SO long as you don't damage the hole or the screw thread you'll be fine if you destroy it when you remove it,
    Cheers Edde.

  4. #4
    ClioSport Area Rep
    Join Date
    Dec 2003
    Location
    North of Ireland
    Posts
    17,214
    Car
    "Navy" N17 TWO

    Re: Removing ABS sensor

    Can't you undo the screw and tap it out with the edge of something?

  5. #5
    Forum User
    Join Date
    Aug 2011
    Location
    Aylesbury
    Posts
    45
    Car
    Ph1 172

    Re: Removing ABS sensor

    Undoing the screw is the easy bit (aside from the usual shagged head). For some reason they plastic of the sensor body is generally forced in so hard, you have to destroy upon removal - use a sensible size drill bit and then ream the hole, using plenty of copper grease when fitting the new one.

  6. #6
    Area Rep
    East Anglia

    Join Date
    Sep 2004
    Location
    Suffolk
    Posts
    11,348
    Car
    Corsa VXR (Missuses)
    Hammer and a screwdriver, done.

  7. #7
    ClioSport Area Rep
    Join Date
    Dec 2003
    Location
    North of Ireland
    Posts
    17,214
    Car
    "Navy" N17 TWO

    Re: Removing ABS sensor

    ^ That's what I thought, easy enough to fit the new one then or does it need any "persuasion" apart from a bit of copper grease?

  8. #8
    Area Rep
    East Anglia

    Join Date
    Sep 2004
    Location
    Suffolk
    Posts
    11,348
    Car
    Corsa VXR (Missuses)
    Copper grease and of course a hammer

  9. #9
    Forum User
    Join Date
    Dec 2008
    Location
    Manchester
    Posts
    4,363
    Car
    Mk1 Focus RS

    Re: Removing ABS sensor

    Lol. My biggest concern was like Edde said, damaging the thread in the hub so the new sensor wouldn't fit properly.

  10. #10
    ClioSport Club Member
    Join Date
    Aug 2010
    Location
    Unique Hair Club HQ
    Posts
    5,871
    Car
    Monaco 172

    Re: Removing ABS sensor

    Just remove the fuses for ABS (if you can on clio's). ABS is s**t anyway.

  11. #11
    Forum User
    Join Date
    Aug 2008
    Location
    Fife, Scotland
    Posts
    627
    Car
    Clio172 / Focus Ti X

    Re: Removing ABS sensor

    ^^^^ do not do this!!!!

  12. #12
    ClioSport Club Member
    Join Date
    Sep 2002
    Posts
    35,657
    Quote Originally Posted by Iceberg_172 View Post
    ^^^^ do not do this!!!!
    Indeed. Do not do this.

  13. #13
    ClioSport Club Member
    Join Date
    Aug 2010
    Location
    Unique Hair Club HQ
    Posts
    5,871
    Car
    Monaco 172

    Re: Removing ABS sensor

    Why not? ABS kicks in far too early and is properly naff when it's actually supposed to do you any good anyway.

  14. #14
    Forum User
    Join Date
    Aug 2008
    Location
    Fife, Scotland
    Posts
    627
    Car
    Clio172 / Focus Ti X

    Re: Removing ABS sensor

    Because the ABS system on the clios also control the brake bias. If you pull the fuse, you will have 50/50 split on the front and rear brakes. If you ever need to stamp on the brakes, the rears will always lock up making it extremely dangerous.

  15. #15
    ClioSport Club Member
    Join Date
    Sep 2002
    Posts
    35,657
    If you disable the abs via the fuse it changes the brake bias to 50:50.

    The easier way is to disconnect a single rear sensor. Disables ABS and retains fwd bias.

  16. #16
    ClioSport Club Member
    Join Date
    Aug 2010
    Location
    Unique Hair Club HQ
    Posts
    5,871
    Car
    Monaco 172

    Re: Removing ABS sensor

    Pretty sure Rob ran his track car with 50/50 bias most of last year with no issues. So can't imagine a standard clio with more weight over the back than a stripped out car, on normal roads would be that bad tbh.

  17. #17
    ClioSport Club Member
    Join Date
    Sep 2002
    Posts
    35,657
    Well think about it. Would you want a 50:50 split with a clio's weight distribution?

  18. #18
    ClioSport Club Member
    Join Date
    Aug 2010
    Location
    Unique Hair Club HQ
    Posts
    5,871
    Car
    Monaco 172

    Re: Removing ABS sensor

    Probably not, but it would mean you wouldn't need to use your handbrake to get the ladies gushing in your local maccy's.

  19. #19
    ClioSport Club Member
    Join Date
    Apr 2009
    Location
    west london / Hertfordshire
    Posts
    574
    Car
    172 Ph1
    Quote Originally Posted by DannyR View Post
    Hammer and a screwdriver, done.
    You took the words right out of my mouth Danny. If the driveshaft is out of the hub even better smash it right through job done 👍

  20. #20
    Forum User
    Join Date
    Aug 2008
    Location
    Fife, Scotland
    Posts
    627
    Car
    Clio172 / Focus Ti X

    Re: Removing ABS sensor

    Quote Originally Posted by barnesautos View Post
    You took the words right out of my mouth Danny. If the driveshaft is out of the hub even better smash it right through job done 👍
    This is what i done lol.

 

 
Page 1 of 2 1 2 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Visitors found this page by searching for:

clio abs sensor cable

clio abs cable removal

how to change abs sensor for reno clio

how to remove the abs sensor on a focus

amazon abs sensor clio 172

changing front abs sensor clio 172

cliosport changing rear ns wheel sensor

how to clean abs sensor on 2003 clio

renault abs sensor screw

how to disable abs sencors

renault clio abs replacement

replacing an abs sensor clio

clio abs sensor replacement

how to change clio abs sensor

renault clio abs how to change

clio sport abs sensor cleaning

how many abs sensors on a cleo
fixing a abs sensor on a clio 2006
how to remove renault front abs sensor
clio brakes abs cable
remove abs sensor clio 1.2
how to remove the abs sensor
abs sensor on clio 197 where
how to adjust the clearance on a abs sensor clio
how to find out which abs sensor is bad clio 172
clio 172 abs fault
abs sensor location mk2 clio
abs sendor clio
how to detach abs connector
replace abs sensor clio
how 2 change abs sensor clio sport 172
new abs sensor clio
abs sensor clio 3
abs sensor location clio 3
abs sensor clio
where are the abs sensors on a renault clio
cleo abs sensor
renault clio 172 how to change abs sensors
how to remove front abs sensor
how do i unplug rear abs sensor on clio
how to remove abs sensor from 2010 clio
change abs sensor renault clio
abs sensors renault clio
how easy it to change a wheel sesor on my 2006 renault clio
how to getfitt abs sensor to clio
where is the abs sensor located on renault clio mk2
clio 172 abs sensor
how to undo abs sensor
renault clio abs sensor replacement
clio wheel speed sensor wire routing

All times are GMT +1. The time now is 04:03.