PH1 Flamer.

[dmallett]

Cars booked in for Cambelt, dephaser, GT cams and mapping in mid april at 519
So the car will hopefully be a fair quicker considering it has 162bhp now!

Also picked up another elbow for the induction from DannyR to replace by one bodged together with a hose adapter and jubilee clips.

[LewisTaylor]

Cars booked in for Cambelt, dephaser, GT cams and mapping in mid april at 519
So the car will hopefully be a fair quicker considering it has 162bhp now!

Also picked up another elbow for the induction from DannyR to replace by one bodged together with a hose adapter and jubilee clips.

Finally the cambelt is getting done! Lol good news mate, you'll have to get it on FMS rollers once your done as that's where you got your 162

[dmallett]

Finally the cambelt is getting done! Lol good news mate, you'll have to get it on FMS rollers once your done as that's where you got your 162

Paired with no aircon and matched inlets it should make some healthy gains

Thought you would be glad that the cambelts being done! ill take it easy untill april well after Snetterton sunday haha.

[dmallett]

Went to Snetterton today, weather was brilliant and got a fair bit of track time in.
The federals handled amazingly imo, once I got the pressures low enough they got proper sticky
The car was superb and only had two problems all day.

Problem 1- Power steering fluid coming out the top of the bottle.
Problem 2- The bolt that holds the tesnioner on the cup alternator vanished! i didnt realise this until we had left and my belt kept squeeking on start up but i didnt bother looking. So did the afternoon and drive home with out it tensioned properly and fixed it when i got in

Fews pics.

[LewisTaylor]

Car looks epic, love it with the black wheels. How are you getting on with bumper pins now? Liking the new lid similar to mine

[DannyR]

I had the PAS thing last time, get it drained and some fresh fluid in there!

[dmallett]

Car looks epic, love it with the black wheels. How are you getting on with bumper pins now? Liking the new lid similar to mine

Mines a cheaper version though! Bumper pins are the same, havent put hose behind them yet! It held alright today though.

I had the PAS thing last time, get it drained and some fresh fluid in there!

Brand new fluid probably just overfilled it knowing me.




Also really need a new throttle cable, it was sticking like mad on the way home grrr.

[DannyR]

Could just be overfilled then!

[Rhys Beal]

Was a great day Dan!

Mine boiled it pas fluid in 5 laps, cooked brakes and grooved the front disks!

Suspension is too soft too but overall was a superb day out and cannot wait to do another one mate!

[hiben1]

Was an awesome day! Cheers Dan

In the middle photo you can see the marshal waving the dreaded red flag!

[Dan@519Automotive]

Was a great day Dan!

Mine boiled it pas fluid in 5 laps, cooked brakes and grooved the front disks!

Suspension is too soft too but overall was a superb day out and cannot wait to do another one mate!

will you let me spec you some improvements now?

[2Damnsly]

Where did you order the tyres from?

[dmallett]

Where did you order the tyres from?

http://www.racecarnewmedia.com/bmtr/news.asp?NewsID=45 is cheapest place, i paid alot more than that about a week before

[Rhys Beal]

will you let me spec you some improvements now?

haha sticking with it for now Dan but will roll on a few more track days and see

[dmallett]

Rhys you checked your pas level yet? Mine seems to be on max now so im taking it being too full as my problem.


Car is running fine today and the exhaust is barely rattling had to tension the aux belt again, hopefully nothing will come loose again

[Rhys Beal]

Yes I have checked mine and it doesn't look as if it's lost much!
And that's good news, it's great that we never really experienced any problems

[DannyR]

Can you put two nuts on dan?

[Will.]

Lovely car. Flamer + black = win.

[dmallett]

It had two on, one vanished so put a nylock nut on top. (Think thats what its called.

As for the actual bolt that was gone which is important I've put a longer bolt in and its done super tight so fingers crossed no more problems

[dmallett]

Fitted the aerocatches to the bumper, seem to hold the bumper pretty well just need some adjusting

Pinched this picture from Dr Jekyll hope he doenst mind


Also another two that Chri5 took last sunday.