What have you ordered? *Detailing*

[Joe,]

I remember the first time I went to pour it. It didn't go well lol.

[JamesBryan]

No need, if you look at the top of the tin, turn the opening, so when you pour it, it's at the top (that make sense?), it makes it a hell of a lot easier to pour.

We have the same tins at work, I never spill a drop doing it that way.

Hmmm.... i'll have to have a look when i get home now. Never realised it could be turned.

[welshname]

Mine is all next to me at my desk at work, ready to take home tonight

[Eddie.]

Hmmm.... i'll have to have a look when i get home now. Never realised it could be turned.

SRS?!

I mean turn the whole tin. So pick it up, so that when it is horizontal as you pour the fluid, the opening is away from the bottle?! You follow what I mean?

The opening will be closer to your face than the floor?!

See picture:

ASTardis.jpg

Make sense???

[welshname]

SRS?!

I mean turn the whole tin. So pick it up, so that when it is horizontal as you pour the fluid, the opening is away from the bottle?! You follow what I mean?

The opening will be closer to your face than the floor?!

See picture:

ASTardis.jpg

Make sense???

See I had the same impression as James, I assumed that there was like a slit in the top (like on UHT milk cartons if you get me) and you span that bit inside upside down.

[aucky]

No one noticed 1000th post

[Cliotoby]

I've got the 5L Tardis as well. Should last you for ages.

It's a strong solvent smell, so don't be tempted to sniff it haha

it soon goes if youre using it a lot!

[Eddie.]

See I had the same impression as James, I assumed that there was like a slit in the top (like on UHT milk cartons if you get me) and you span that bit inside upside down.

There might be. But if it's just a hole like it looks like it would be in that photo, then if you pour it the way I suggest, and you're not a complete ape, you won't spill a drop. As I say, we have thinners and lacquers in the same size and shape tins, and that's how I pour it

[JamesBryan]

That makes sense now Ed!

I thought there was a valve or something when you first mentioned it

[RussZS]

FK1000P (for wheels)
Optimum MF Polishing Pads and Hyper Polish (MF pads you can use on Rotary)
1500, 2000, 2500 and 3000 Grit Megs Paper (wet sanding an ST500 rear quarter as part of a detail on Saturday)
CG Wooly Mammoth
Scholl S30+
Menz PO85RD, 106FA, 3.02 and FG
Wolfs Decon Gel 500ml
Zaino Z18 (Clay bar - never tried it)
BriteMAX BlackMAX and Polymer Sealant
Festool Denibber
Zymol Glasur
Black Nitrile Gloves
Clark Low Entry Trolley Jack
Clark Space Heater and a lot of Butane Gas!
Dooka Wash Pad and Wheel Mitt

[Cliotoby]

Glasur again.

Russ id be intadrested to know your opinion on teh mammoth vs. a Polished Bliss yellow towel

[gally]

Really really interested in the wash pad Russ, really fancy ordering one up for the better weather.

Z18 is fantastic btw. I like it even more than BH but the price difference comes into it.

[Yellow Dave]

your orders are getting bigger and bigger Russ, hope the CR samples sell in time of the new orders lol.

Out of curiousity, whats the MF pads like by rotary

[JD]

Denibber, Russ? Touch ups? You've been reading the DW guides...

[Cliotoby]

Autosmart Blast (Bubblegum, Cool)
3 Autosmart Sprayers


Going to order some rubber gloves from Clean Your Mum too. - Gally be prepaired.

[Jon.G]

SRS?!

I mean turn the whole tin. So pick it up, so that when it is horizontal as you pour the fluid, the opening is away from the bottle?! You follow what I mean?

The opening will be closer to your face than the floor?!

See picture:

ASTardis.jpg

Make sense???

You'll pour it on your hand won't you?

[gally]

Got a nice present today...

[Joe,]

Lovely stuff

Oh, and I no what you mean now edd

[aucky]

Going to order some rubber gloves from Clean Your Mum too. - Gally be prepaired.

I wear those nitrile gloves at work all the time. They are the last thing I want to wear at home.
Dirty jobs only.

Sweaty hands ftl.

[Eddie.]

You'll pour it on your hand won't you?

Hold it from the side?