Results 1 to 9 of 9
  1. #1
    Forum User
    Join Date
    May 2008
    Location
    derbyshire / chesterfield
    Posts
    1,728
    Car
    Astra GSI, 172, Golf

    farecla g6 vs g3

    just wondered everyones opinions on farecla g6 i have always used g3 before which was ok but very messy and took ages to get the compound of.. recently iv been using the g6 with the g6 mop pad and its loads better you use it dry as apposed to wet with g3 so is alot cleaner and no need to wash of what ever you have buffed after polishing which is a must with g3.
    iv also found it gives a better shine than g3 aswell... which normally the higher up you go its more of a polish/ wax than a cuttin compound.

    just wondered if anyone else had used it and there thoughts on it.

  2. #2
    ClioSport Club Member
    Join Date
    Oct 2005
    Posts
    21,490

    Re: farecla g6 vs g3

    Not used it but I've heard it is good for use on cars who's owners are;

    Attachment 45895

  3. #3
    ClioSport Club Member
    Join Date
    Jun 2007
    Posts
    38,524

    Re: farecla g6 vs g3

    Pmsl!

    It's used in bodyshops with mops. I should know, they use it in mine sometimes.

    Get the 3M range or some menz samples. They come in 250ml from most places mate.

  4. #4
    ClioSport Club Member
    Join Date
    Feb 2008
    Location
    N Yorkshire
    Posts
    2,015
    Car
    Dodgy one

    Re: farecla g6 vs g3

    I've recently got our boss to scrap off G3 and get 3ms fast cut plus, Seems to be miles ahead on old paint and doesnt leave half as many holograms while still giving a good cut.

    I use (not everyone likes it lol) Green top (fast cut), Yellow top (cant remember its in boot of my car lol) and blue top (ultrafina)

    On fresh paint theres no difference between the two ive found though.

  5. #5
    Forum User
    Join Date
    May 2008
    Location
    derbyshire / chesterfield
    Posts
    1,728
    Car
    Astra GSI, 172, Golf

    Re: farecla g6 vs g3

    yeah iv been using it on flatted paint to buff up. iv nto had any problems with it tho it looks spot on. not tried the 3m stuff may give thata blast will it cut up aswell as g3 does ?

  6. #6
    ClioSport Club Member
    Join Date
    Oct 2005
    Posts
    21,490

    Re: farecla g6 vs g3

    Quote Originally Posted by mx1_champ View Post
    yeah iv been using it on flatted paint to buff up. iv nto had any problems with it tho it looks spot on. not tried the 3m stuff may give thata blast will it cut up aswell as g3 does ?
    It has more control, as you can use specific grades. G3 is like a blind man with a polisher. You have no idea how quickly it's cutting.

  7. #7
    Forum User
    Join Date
    May 2008
    Location
    derbyshire / chesterfield
    Posts
    1,728
    Car
    Astra GSI, 172, Golf

    Re: farecla g6 vs g3

    yeah thats the only thing i dislike about g3 although i am used to it as its mainly what i use, never really had a problem with it going through etc .

  8. #8
    ClioSport Club Member
    Join Date
    Oct 2005
    Posts
    21,490

    Re: farecla g6 vs g3

    Not really talking about going through buddy, more how much paint you remove each time. The art of machine polishing is to remove swirls and UDS with the least amount of paint depth loss possible.

  9. #9
    Forum User
    Join Date
    May 2008
    Location
    derbyshire / chesterfield
    Posts
    1,728
    Car
    Astra GSI, 172, Golf

    Re: farecla g6 vs g3

    ahh right i get you.. yeah i suppose there is that factor but i was mainly on about using it for bringing up flatted back paint

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Visitors found this page by searching for:

whats the difference between farecla g3

farecla g3 or g6

Farecla G3 Ultra

Car polish better than g3
g6 cutting compound wet or dry use
g6 farecla what is difference g3
g6 cutting compound wet ur dry
whats the difference farecla g6 g3
g3 cutting compound on fresh paint
farecla g3 how do you use it
farecla g6 vs g3
g6 cutting compound
difference between g3 and g6 server
farecla g3 g6 klaipeda
farecla g3 oder g6
opinions farecla
farecla klaipedoje
farecla g6 или g3
lwhich is best g3 or g6
difference between farecla g3 and g6
forecla g3 или g6
which better forecla g3 or g6
which shoud go first g3 or g6 farecla
what is the difference between farecla g3 and farecla 200
paste compound g3 or g6
g3 or g6 compund
how good is g6 compound
g6 compound paste using machine polisher
difference between g3 and g6
farecla g6 vai g3
fast cut or g3
difeence in g3 and g6
g3 and g6 compounds
difference between g6 and g3 farecla
farecla g6 форум
forskel på G3 og G6 paste
farecla paste compound diferences G3 G6
which is stronger farecla g6 rapid cutting compound or g3 compound
whats the difference between farecla
dry use farecla vs g3
g6 farecla
whats the difference between farecla g3 and g6
difference between g3 and g4 polishing compounds
whats the difference between g3 and g6 cutting compound
g6 cutting compound wet or dry
which is finer g3 or g6 farecla polish
g6 cutting paste
what the differance between g3 and g6
farecla g3-g6-g10
polishing with farecla G6

All times are GMT +1. The time now is 14:52.